|
AUDIODIDAKT
|
 |
« Reply #30 on: July 21, 2009, 06:09:09 pm » |
|
Just Installed new MOBO, EP-45, and new RAM (all new all in warrenty, hehehe)
Hope this ends my problems.
Added 2x 2GB WD hdd's and made backups of all music, pffff (feels good to have back-up)
Now using the COM port on MOBO with homemade IR device. COM A port on MB---->>>backet with RS232 connector (9pins)----->>>homebrew IR dingie----->>>WinLirc.
And WinLirc learns them all, no problem in that.
So IR-remote is also possible.
Btw nice supprice is that the EP-45 sounds really good, more bass.
|
|
|
|
|
Logged
|
(Sept 30, 2010)
W7 Ultimate x64 Tweaked/60 GB SSD OCZ Vertex (1.50)/Gigabyte GA-EP45-EXTREME/Intel Q9550 2.83Ghz/OZC Reaper 2x2GB/
Esi Juli@ soundcard (KS)(x2v-v0_978)(Tweaked Coaxial)/Nvidea Geforce 9800 GTX+/750 Watt Zalman ZM-750-HP/100 MB Fiber-Optical Internet/
(XXHighEnd 0.9z-2)
#4Engine, Special Mode, 48 samples, SFS 12MB, DAP, Scheme=3, Q1=1, Q2/Q3/Q4/Q5=30,30,0,0, PlayerPrio=Low, ThreadPrio=Realtime
x-Allow Format Change, x-Stop Services, x-Copy to XX-drive by Standard, x-Start Engine3 During Conversion
|
|
|
|
AUDIODIDAKT
|
|
« Reply #31 on: July 21, 2009, 09:25:19 pm » |
|
pushed one button on my remote, and xx site opens before me, hahaha. !p::Run www.xxhighend.nlgreat! |
(Sept 30, 2010)
W7 Ultimate x64 Tweaked/60 GB SSD OCZ Vertex (1.50)/Gigabyte GA-EP45-EXTREME/Intel Q9550 2.83Ghz/OZC Reaper 2x2GB/
Esi Juli@ soundcard (KS)(x2v-v0_978)(Tweaked Coaxial)/Nvidea Geforce 9800 GTX+/750 Watt Zalman ZM-750-HP/100 MB Fiber-Optical Internet/
(XXHighEnd 0.9z-2)
#4Engine, Special Mode, 48 samples, SFS 12MB, DAP, Scheme=3, Q1=1, Q2/Q3/Q4/Q5=30,30,0,0, PlayerPrio=Low, ThreadPrio=Realtime
x-Allow Format Change, x-Stop Services, x-Copy to XX-drive by Standard, x-Start Engine3 During Conversion
|
|
|
|
AUDIODIDAKT
|
|
« Reply #32 on: July 23, 2009, 03:08:44 pm » |
|
So, everything programmed with IR-assistant. Used Peter's AutoHotKey script that is in XX already. Works flawless. (some exceptions, like previous doesn't work but thats in xx, I believe, but I can overcome this problem) OSD (on screen display) with colors and fonts and choose were too put text 1 push on a remote button - opens xx, opens settings, selects engine 3, selects upsampling, then clicks Library button - AND NOW IS XX READY TO PLAY.  Its also possible to program the Unattended settings under 1 remote button. You can do anything you want, just personalize your version of XX. Can even control the mouse pretty dawn good. You only need a remote with a decent toggle button (left,right,up,down and enter) Never thought it would be this easy!!   ROY PS: Range is about +30m.(depends on remote and battery's) |
|
|
|
|
Logged
|
(Sept 30, 2010)
W7 Ultimate x64 Tweaked/60 GB SSD OCZ Vertex (1.50)/Gigabyte GA-EP45-EXTREME/Intel Q9550 2.83Ghz/OZC Reaper 2x2GB/
Esi Juli@ soundcard (KS)(x2v-v0_978)(Tweaked Coaxial)/Nvidea Geforce 9800 GTX+/750 Watt Zalman ZM-750-HP/100 MB Fiber-Optical Internet/
(XXHighEnd 0.9z-2)
#4Engine, Special Mode, 48 samples, SFS 12MB, DAP, Scheme=3, Q1=1, Q2/Q3/Q4/Q5=30,30,0,0, PlayerPrio=Low, ThreadPrio=Realtime
x-Allow Format Change, x-Stop Services, x-Copy to XX-drive by Standard, x-Start Engine3 During Conversion
|
|
|
|
Telstar
|
|
« Reply #33 on: July 24, 2009, 12:51:46 am » |
|
Very sweet. Just in time for my music PC (once i get the damn mainboard)
|
|
|
|
|
Logged
|
(2nd Apr 2018)
Software:
W10 14393 Pro x64 | XXHE 2.10 | MinOS | Q=14x1/0/0/0/0 | SFS 5,19 mixed contiguous | Nervous rate 1 | 4096k buffer |
Hardware:
OrigenAE H5 case | E5300 fanless | 8GB RAM | Winmate DC-DC fanless PSU | OS on SSD | Renesas USB3 pcie card | Belden highspeed usb cable | Audio-gd dac19 NOS with sigxer F1 | My_ref_FE mono amps | Albedo Apex speakers
|
|
|
Ava12
Audio Loudspeaker
 Offline
Posts: 75
Headphone Audiophile
|
|
« Reply #34 on: July 24, 2009, 02:57:39 pm » |
|
 niiiice, much better and I guess handier than WLAN. Thanks! |
|
|
|
|
Logged
|
PlexWriter Premium 2 (FireWire enclosure) -> Fujitsu Siemens AMILO M3438, Win7 32Bit, XX [Engine#4 double, Threadprio = high / Playerprio = below normal / V = -33 / Q1 = 6 / Scheme2] -> M-Audio ProFire 610 [buffer 64, bypassed volume control] -> balanced β22 headphone power amplifier -> Sennheiser HD650 / Grado RS1i
|
|
|
|
AUDIODIDAKT
|
|
« Reply #35 on: July 24, 2009, 04:23:15 pm » |
|
The only thing it takes is a receiver program that can simulate keyboard keys. And of course can translate them out of a random IR remore command (like volume up from your TV remote).
But I can't find a reliably working one. This is just my inexperience I'm afraid.
So ...
Once you have one that can e.g. simulate Alt-U while XXHighEnd (the GUI) is running (this is unrelated to AutoHotKey), I take care of the rest.
It does now, Peter, maybe some advise. If you like I can send you a prebuild (and tested) receiver. Have made 5 already. Or maybe the scheme so you can build it yourself And test this on your own PC There is no hurry in this, eveything works fine but it could be simpler. Grtz Roy |
|
|
|
|
Logged
|
(Sept 30, 2010)
W7 Ultimate x64 Tweaked/60 GB SSD OCZ Vertex (1.50)/Gigabyte GA-EP45-EXTREME/Intel Q9550 2.83Ghz/OZC Reaper 2x2GB/
Esi Juli@ soundcard (KS)(x2v-v0_978)(Tweaked Coaxial)/Nvidea Geforce 9800 GTX+/750 Watt Zalman ZM-750-HP/100 MB Fiber-Optical Internet/
(XXHighEnd 0.9z-2)
#4Engine, Special Mode, 48 samples, SFS 12MB, DAP, Scheme=3, Q1=1, Q2/Q3/Q4/Q5=30,30,0,0, PlayerPrio=Low, ThreadPrio=Realtime
x-Allow Format Change, x-Stop Services, x-Copy to XX-drive by Standard, x-Start Engine3 During Conversion
|
|
|
|
AUDIODIDAKT
|
|
« Reply #36 on: July 24, 2009, 04:44:48 pm » |
|
Hardware works 100% perfect and works with 99% of IR-remotes (so, pick a remote you like)
I'll post scheme and maybe guide later in seperate tread (this tread is about WiFi)
btw it cost you 5 euro's to build. (and software is freeware)
Can't garanty if it works on all mobo's.
But check if yours has a 9 pins com1 (A) port or RS232 port.
Hope Peter will pick this up in some time, maybe integrate some in XX.
Currently using IR-Assistant but there are more kinds of software that I will check out in some time.
|
|
|
|
|
Logged
|
(Sept 30, 2010)
W7 Ultimate x64 Tweaked/60 GB SSD OCZ Vertex (1.50)/Gigabyte GA-EP45-EXTREME/Intel Q9550 2.83Ghz/OZC Reaper 2x2GB/
Esi Juli@ soundcard (KS)(x2v-v0_978)(Tweaked Coaxial)/Nvidea Geforce 9800 GTX+/750 Watt Zalman ZM-750-HP/100 MB Fiber-Optical Internet/
(XXHighEnd 0.9z-2)
#4Engine, Special Mode, 48 samples, SFS 12MB, DAP, Scheme=3, Q1=1, Q2/Q3/Q4/Q5=30,30,0,0, PlayerPrio=Low, ThreadPrio=Realtime
x-Allow Format Change, x-Stop Services, x-Copy to XX-drive by Standard, x-Start Engine3 During Conversion
|
|
|
|
PeterSt
|
|
« Reply #37 on: July 24, 2009, 05:56:48 pm » |
|
The only thing it takes is a receiver program that can simulate keyboard keys. And of course can translate them out of a random IR remore command (like volume up from your TV remote).
But I can't find a reliably working one. This is just my inexperience I'm afraid.
So ...
Once you have one that can e.g. simulate Alt-U while XXHighEnd (the GUI) is running (this is unrelated to AutoHotKey), I take care of the rest.
It does now, Peter, maybe some advise. If you like I can send you a prebuild (and tested) receiver. Have made 5 already. Or maybe the scheme so you can build it yourself And test this on your own PC There is no hurry in this, eveything works fine but it could be simpler. Grtz Roy Hi Roy, Can you please tell me what kind of advise you want, or what you want me to do ? I guess it is about this : but it could be simpler ... but I can't guess how or what ...  Peter |
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
|
AUDIODIDAKT
|
|
« Reply #38 on: July 24, 2009, 07:40:48 pm » |
|
I know, I know,
Yep, make things simpler.
How or what, have to work with it a couple of days more, to give you more detailed info.
But it is like this:
When coming home from work, sit down, switch on audio-PC, from then on I would like to control xx fully by remote.
(Have also schematics to startup PC by IR, but later on)
So would like to leave out that keyboard and mouse, where I can.
1 - WinLirc doesn't start-up with windows so can't control with remote yet. (still have to go on pc to switch that on) - Taskschedular, maybe!
2 - IR-Assistant does not start-up with windows either. and you have to push activate button everytime program starts.
3 - I used mouse positions on screen (x,y) to do a start-up string, it is funny, but xx can shift his posistion on screen at startup. (solved in full screen ,static positions (x,y))
(everytime xx is started have to select settings, select engine3 then upsample.)
Is there another way? (Didn't try if this possible thru AHK)
4 - Have to work out a way to smoothly select another album (WiFi is liked for this !!)
5 - Whats that story with previous (Unattended)?
6 - Your DAC has a IR-remotly controlled volume control, right?
For now!
|
|
|
|
|
Logged
|
(Sept 30, 2010)
W7 Ultimate x64 Tweaked/60 GB SSD OCZ Vertex (1.50)/Gigabyte GA-EP45-EXTREME/Intel Q9550 2.83Ghz/OZC Reaper 2x2GB/
Esi Juli@ soundcard (KS)(x2v-v0_978)(Tweaked Coaxial)/Nvidea Geforce 9800 GTX+/750 Watt Zalman ZM-750-HP/100 MB Fiber-Optical Internet/
(XXHighEnd 0.9z-2)
#4Engine, Special Mode, 48 samples, SFS 12MB, DAP, Scheme=3, Q1=1, Q2/Q3/Q4/Q5=30,30,0,0, PlayerPrio=Low, ThreadPrio=Realtime
x-Allow Format Change, x-Stop Services, x-Copy to XX-drive by Standard, x-Start Engine3 During Conversion
|
|
|
|
AUDIODIDAKT
|
|
« Reply #39 on: July 24, 2009, 10:03:54 pm » |
|
1 and 2 solved.  Didn't know that, but it can be done in task manager (never used it) Created new tasks in taskmanager, so @ startup - WinLirc starts, IR-Assistant starts and activates  , XX.ahk starts and ofcourse its possible to
start XX also.This would be a nice startup. for an audio-pc Next the xx settings ??? Can you leave this out, maybe |
|
|
« Last Edit: July 25, 2009, 05:19:54 pm by AUDIODIDAKT »
|
Logged
|
(Sept 30, 2010)
W7 Ultimate x64 Tweaked/60 GB SSD OCZ Vertex (1.50)/Gigabyte GA-EP45-EXTREME/Intel Q9550 2.83Ghz/OZC Reaper 2x2GB/
Esi Juli@ soundcard (KS)(x2v-v0_978)(Tweaked Coaxial)/Nvidea Geforce 9800 GTX+/750 Watt Zalman ZM-750-HP/100 MB Fiber-Optical Internet/
(XXHighEnd 0.9z-2)
#4Engine, Special Mode, 48 samples, SFS 12MB, DAP, Scheme=3, Q1=1, Q2/Q3/Q4/Q5=30,30,0,0, PlayerPrio=Low, ThreadPrio=Realtime
x-Allow Format Change, x-Stop Services, x-Copy to XX-drive by Standard, x-Start Engine3 During Conversion
|
|
|
|
AUDIODIDAKT
|
|
« Reply #40 on: July 25, 2009, 12:19:36 am » |
|
Also nice, Nr, 1,2,3 etc on remote can be used too, With mouse clicks on screen position (full-screen) Track 1 = click playlist, (pauze 500ms),click track 1, click play (or just select the track untill you press "play"). Track 2 = you can guess  Track 11 = I don't know yet. (I have a TV/DVD button switch on my remote, so if I use both I can do 20 tracks)  This zapps a bit easier inside your albums So you don't really need PREV 'previous'  Play unattended would be: click settings, pauze 500ms, click show as wallpaper, click unattended, maybe click play could be next. Also in startup process too leave the mouse pointer near or on your music tree (yes the one that is going to be bigger (longer) in new version of xx, hahaha) Use Toggle buttons from there too select an album And program a remote button for the "<" button in your gallery. so going back would be easy this way Hmm, this is really going to work  |
|
|
|
|
Logged
|
(Sept 30, 2010)
W7 Ultimate x64 Tweaked/60 GB SSD OCZ Vertex (1.50)/Gigabyte GA-EP45-EXTREME/Intel Q9550 2.83Ghz/OZC Reaper 2x2GB/
Esi Juli@ soundcard (KS)(x2v-v0_978)(Tweaked Coaxial)/Nvidea Geforce 9800 GTX+/750 Watt Zalman ZM-750-HP/100 MB Fiber-Optical Internet/
(XXHighEnd 0.9z-2)
#4Engine, Special Mode, 48 samples, SFS 12MB, DAP, Scheme=3, Q1=1, Q2/Q3/Q4/Q5=30,30,0,0, PlayerPrio=Low, ThreadPrio=Realtime
x-Allow Format Change, x-Stop Services, x-Copy to XX-drive by Standard, x-Start Engine3 During Conversion
|
|
|
|
PeterSt
|
|
« Reply #41 on: July 25, 2009, 08:13:19 am » |
|
Ok, I think I understand that all. I will focus on it myself and complete things where needed (like that < button). Can you leave this out, maybe Why ? because this is another message in the sequence of booting the PC ? I just leave it on all the time ... Anyway, I don't think it should go because it just informative. I didn't anticipate on people rebootiong their PC twice a day though ...  |
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
|
SeVeReD
|
|
« Reply #42 on: July 25, 2009, 09:11:48 am » |
|
Ok, I think I understand that all. I will focus on it myself and complete things where needed (like that < button). Can you leave this out, maybe Why ? because this is another message in the sequence of booting the PC ? I just leave it on all the time ... Anyway, I don't think it should go because it just informative. I didn't anticipate on people rebootiong their PC twice a day though ... Kinda gets old having to "ok" that hotkey message each time I start it up... and ya, sometimes i reboot more than twice a day hehe. Can't you put a chk box on it saying "don't show this message again" ... I know how to set up hot keys by now and don't need to see that "warning" each time I start it. |
|
|
|
|
Logged
|
0.9z-8-3a WAV/CUE files on HDDs via MB FW400>; Win7 pro ttp://www.phasure.com/index.php?topic=352.msg4021#msg4021); [XXHighEnd player Qs 7, 0, 0, 0, 0; eng 4; adaptive; scheme#3; player priority low; thread priority realtime; clock res 5ms: SFS 420 dac is 24/192 w/32bits; Play Unattended; Stop Services ticked; Wallpaper & Show Back ticked - Mirror Image unticked; Start Engine unticked;garbage collect ticked; copy files to XX-drive; *quad arc prediction upsampling*: straight contiguous:>PCI FW800 card>Fireface 800 DAC [latency 2048 samples for 176.4]; usb/ethernet/mb audio shut off @ MB |
|
|
|
AUDIODIDAKT
|
|
« Reply #43 on: July 25, 2009, 09:14:58 am » |
|
Ok, I think I understand that all. I will focus on it myself and complete things where needed (like that < button). Can you leave this out, maybe Why ? because this is another message in the sequence of booting the PC ? I just leave it on all the time ... Anyway, I don't think it should go because it just informative. I didn't anticipate on people rebootiong their PC twice a day though ... And the scroll up en down button in Gallery. can be keys too. On your remote could that be PROG +/- (channel zappen) And leave the toggle button work as mouse to select an album. |
|
|
|
Logged
|
(Sept 30, 2010)
W7 Ultimate x64 Tweaked/60 GB SSD OCZ Vertex (1.50)/Gigabyte GA-EP45-EXTREME/Intel Q9550 2.83Ghz/OZC Reaper 2x2GB/
Esi Juli@ soundcard (KS)(x2v-v0_978)(Tweaked Coaxial)/Nvidea Geforce 9800 GTX+/750 Watt Zalman ZM-750-HP/100 MB Fiber-Optical Internet/
(XXHighEnd 0.9z-2)
#4Engine, Special Mode, 48 samples, SFS 12MB, DAP, Scheme=3, Q1=1, Q2/Q3/Q4/Q5=30,30,0,0, PlayerPrio=Low, ThreadPrio=Realtime
x-Allow Format Change, x-Stop Services, x-Copy to XX-drive by Standard, x-Start Engine3 During Conversion
|
|
|
|
GerardA
|
|
« Reply #44 on: July 25, 2009, 12:30:19 pm » |
|
He audiodidact congratulations, nice job.
Sorry for me I don't have a serial com-port on my PC anymore...
My IR works through USBCIF, I guess they don't want us to mess around with this because I don't find much homeware for this. BTW where did you find the IR-Assisant?
Gerard.
|
|
|
|
|
Logged
|
asrock ->intel 6700/4GB/Samsung 850 SSD/Win 10() Pro /XXHE 2.09 Special (32) Clock: max ,SFS: 4 MC, Q1 = 14, Q2,3,4,5=0,0,0,2 Quad AP, No Invert / Playerprio = Belownormal / ThreadPrio = Realtime / Scheme = 3 / Mixed contigious / Unattended -> Minidsp 2x4HD (IIR and FIR)-> Mivoc AM80 / 300B / gainclone -> TDL TL/Seas Excell/ScanSpeak
|
|
|
|
