|
Flecko
|
 |
« on: June 17, 2007, 03:04:40 pm » |
|
Hit Peter,
as you said the sound chenged in version i. At least when compared to version f. The sound of engine 1 has become thicker with Vi but with loss of resolution. It is hard to say wich is to prefer... vf lacks of bottom end and vi seams not so accurate...but I would prefer Vf because the sound is more 3D and finer.
Sombody else has made experience with this?
Greetings Adrian
|
|
|
|
|
Logged
|
Software: Windows7 Ultimatex64SP1 | XXHighend 9z9b
Hardware: | Gigabyte X79-UD3 | i7-3820 | 16 GB DDR3 | OS on 128 GB Samsung SSD 830 | Music on 2TB WD Caviar Green | Seasonic X-660
XXHE Settings: | Engine 4 | Adaptive | Buffer=1024 | Q12345=[14,0,0,0,0] | xQ1=1 | Q5=3 | Scheme=3 | Mixed Contiguous with SFS=12 | 176.4kHz32bit | ArcPred + Peakextend | Clock=1ms |
|
|
|
|
PeterSt
|
|
« Reply #1 on: June 18, 2007, 12:53:15 am » |
|
This is very good information Adrian; Often I think I hear differences, but when it is confirmed by others ...
For me it, currently, it is very difficult anyway, because I'm more busy with the technical stuff than listening lately.
Thank you !
Peter
|
|
|
|
« Last Edit: March 15, 2009, 09:06:18 am by PeterSt »
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
|
PeterSt
|
|
« Reply #2 on: August 13, 2007, 06:48:52 pm » |
|
Adrian, I realize I never took the effort to look into this. But how are you doing ? You are still using Windows2000 do you ? And I *still* did not try that ...  Currently I lost track of any possible necessities (for you) to switch to a higher version than the "f" you mention here. Do you have them ? (obviously I was working on Vista only for the past months) Peter |
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
|
Flecko
|
|
« Reply #3 on: August 25, 2007, 10:09:25 pm » |
|
Hi Peter, I didn't had much time to listen to music in the last weeks. I move to a new appartment again so there was very much to to (and still is). I made the test with version f to i one day with warmed up equimpment and the differences was easy to hear (i thought). Some days later I did it again with cold equipment and I heard nothing  . You are still using Windows2000 do you ?
And I *still* did not try that ... unhappy
I still use 2000 but I also hadn't the chance to try something else. I noticed you were very busy with the new updates for vista. Perhaps you will find some time sometimes to try it.  Currently I lost track of any possible necessities (for you) to switch to a higher version than the "f" you mention here. Do you have them ?
(obviously I was working on Vista only for the past months)
I just listened short to the new versions, but guessing the changes made for Vista I didn't listen carefully to differences in the sound. Greetings Adrian |
|
|
|
|
Logged
|
Software: Windows7 Ultimatex64SP1 | XXHighend 9z9b
Hardware: | Gigabyte X79-UD3 | i7-3820 | 16 GB DDR3 | OS on 128 GB Samsung SSD 830 | Music on 2TB WD Caviar Green | Seasonic X-660
XXHE Settings: | Engine 4 | Adaptive | Buffer=1024 | Q12345=[14,0,0,0,0] | xQ1=1 | Q5=3 | Scheme=3 | Mixed Contiguous with SFS=12 | 176.4kHz32bit | ArcPred + Peakextend | Clock=1ms |
|
|
|
|
SeVeReD
|
|
« Reply #4 on: August 26, 2007, 01:20:59 am » |
|
Hit Peter,
as you said the sound chenged in version i. At least when compared to version f. The sound of engine 1 has become thicker with Vi but with loss of resolution. It is hard to say wich is to prefer... vf lacks of bottom end and vi seams not so accurate...but I would prefer Vf because the sound is more 3D and finer.
Sombody else has made experience with this?
Greetings Adrian
I'm confused? How could this thread have been started in June before i even came out? Anyway, I'm still listening between D and I versions myself. I am not listening as closely as I was between D and H because the differences I hear between D and I do not bother me like they did in D & H. I'm sorry I have't put as much time in comparing D and I as I'd like, I just put on I and play with the Q1 slider, currently the slider is playing around 18.... but I'm all over the place with it (which makes hard comparing,,, I need to be more systematic than I've been). Once I load a song in mem, if I stop that song and change the slider then start the song again, do the changes in slider take hold?...sometimes I get the feeling the changes don't take place until I load a different song. |
|
|
|
|
Logged
|
0.9z-8-3a WAV/CUE files on HDDs via MB FW400>; Win7 pro ttp://www.phasure.com/index.php?topic=352.msg4021#msg4021); [XXHighEnd player Qs 7, 0, 0, 0, 0; eng 4; adaptive; scheme#3; player priority low; thread priority realtime; clock res 5ms: SFS 420  dac is 24/192 w/32bits; Play Unattended; Stop Services ticked; Wallpaper & Show Back ticked - Mirror Image unticked; Start Engine unticked;garbage collect ticked; copy files to XX-drive; *quad arc prediction upsampling*: straight contiguous:>PCI FW800 card>Fireface 800 DAC [latency 2048 samples for 176.4]; usb/ethernet/mb audio shut off @ MB |
|
|
|
PeterSt
|
|
« Reply #5 on: August 26, 2007, 01:46:03 am » |
|
Haha, you guys talk about version a,b,c,d,i without mentioning whether it's about 0.7 or 0.8, 0.9 etc. That's why.
The changed slider takes effect when a new .wav would be loaded. Or when (stop and) play is pressed (or Next, Prev).
FYI : A next track is nothing to this respect for a big cue pile. But you know that I guess ...
|
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
|
SeVeReD
|
|
« Reply #6 on: August 26, 2007, 02:41:45 am » |
|
Haha, you guys talk about version a,b,c,d,i without mentioning whether it's about 0.7 or 0.8, 0.9 etc. That's why.
The changed slider takes effect when a new .wav would be loaded. Or when (stop and) play is pressed (or Next, Prev).
FYI : A next track is nothing to this respect for a big cue pile. But you know that I guess ...
I want to clarify: When I load one of my whole album WAVs it takes ~15 seconds.... after playing it, if I push stop button, and then push play button, that same WAV starts up immediately. But what you are saying is, after I start up a WAV with Q1 at 15; push stop button; change Q1 slider to 17; push start button... that the new Q1 postition at 17 will play the WAV at that position 17. Ok? thanks Peter. hope you had a good vacation... now get to work lol |
|
|
|
|
Logged
|
0.9z-8-3a WAV/CUE files on HDDs via MB FW400>; Win7 pro ttp://www.phasure.com/index.php?topic=352.msg4021#msg4021); [XXHighEnd player Qs 7, 0, 0, 0, 0; eng 4; adaptive; scheme#3; player priority low; thread priority realtime; clock res 5ms: SFS 420 dac is 24/192 w/32bits; Play Unattended; Stop Services ticked; Wallpaper & Show Back ticked - Mirror Image unticked; Start Engine unticked;garbage collect ticked; copy files to XX-drive; *quad arc prediction upsampling*: straight contiguous:>PCI FW800 card>Fireface 800 DAC [latency 2048 samples for 176.4]; usb/ethernet/mb audio shut off @ MB |
|
|
|
