andy74
Audio Loudspeaker
 Offline
Posts: 142
|
 |
« Reply #30 on: February 19, 2008, 11:48:22 am » |
|
Peter,
invert is left unchecked all the time.
Thanks for the new version for me.
Actually it is strange that we (Russ and I) hear the difference where you did not intend to change anything.
Andrey
|
|
|
|
|
Logged
|
1. USB FreeAgent 500Gb -> P4 2.8 2gb RAM Vista Ult -> XXHE Q1=14 prio both = Normal -> esi juli@ (SPDIF is default device->analog mon in ESI panel->analog outs) -> nad 320BEE->Boston Acoustics cr150 3. IBM thinkpad r52->VIsta Ult XXHE, Unattended playerprio=Nothing threadPrio=Normal -> very cheap usb audio adapter -> shure attenuator -> headphones shure 210  |
|
|
Calibrator
Audio Enthusiast
Offline
Posts: 556
Certified tweakaholic
|
|
« Reply #31 on: February 19, 2008, 12:42:32 pm » |
|
Hi All  to recap my setup here, I have a Juli@ card ( 48 samples buffer ) feeding via coax into my Sony pre-processor ( TA-E9000ES ). The Sony pre-pro is essentially digital throughout and as such I would imagine it benefits well from a higher sample rate than standard 16/44.1K. My initial listening to ver 'U' was with Vol at 0dB and no change to the 'DAC' setting of 16/44.1k. Something had definately changed for the better in my perception though compared to ver 'T', but I'm not naive enough to think that it wasn't a placebo effect in anticipation of the new version. One's listening perception's change from day to day and your mood so it was pleasing to discover that the next days listening still brought forth the improvement I had initially discovered. Further experiments today had me playing with the Volume control on XXHE in conjunction with the Volume control on the Sony. I normally have the Sony set at -30dB readout, and that gives me an inroom volume of about 80 to 85dB peaks. I dropped the XXHE vol to -30dB and maximised the Sony vol to 0dB. Overall volume in room was still the same but there was now a slight background 'hiss'. Juggling the two controls, I have settled on -12dB on XXHE and -18dB on the Sony. This combination is very pleasing ! I should also add that I have set the 'DAC' setting to 24/96K ( which is what the Sony is capable of handling ) even though the Juli@ will output 24/192. I also found that dropping Q1 down to -2 helped tighten up the soundstage a tad. So, for those without external DAC's, you can still experiment with the setting of each volume control, and may well find benefit's in that route. Happy listening folks Russ |
|
|
|
|
Logged
|
(Sep 26th 2012) ( 0.9z-7-4 ) Parameters (0.9z-7-4) -> Coming soon...Parameters (0.9z-6-1) ->Same as for 0.9z-6 Parameters (0.9z-6) -> http://members.iinet.net.au/~calibrator/XXHE/XXHE_parms_(0.9z-6).jpgHardware: Asus P5Q, H2O cooled 3.6GHz C2D, 8GB ram, W7 Ult X64 (NO SP1), O/S plus Galleries on 2x(OCZ 60GB Vertex2) -> ESI Juli@ (v0.978 drivers @ 48 samples) -> coax SPDIF -> Integra DHC-9.9 -> Hafler XL600 -> SGR Audio S-series Octagons -> aural organs -> nucleus accumbens  ==================== Turntables .. how quaint  |
|
|
|
PeterSt
|
|
« Reply #32 on: February 19, 2008, 01:09:54 pm » |
|
Thank you for clarifying Russ ! So, for those without external DAC's, you can still experiment with the setting of each volume control, and may well find benefit's in that route. Well, since the word is out anyway ... for those who don't want to get rid of their pre-amps for their own reasons *or* for those who just want to experiment ... The whatever it is I "applied" (hehe) causes that each combination of volume of pre-amp vs. XX (with the same totalling output level I mean) will create another sound. So, there you have it. Now you can get lost in combinations.  Although with Russ it probably is (and initially was) about a proper balance between (pre)amplifier noise and using the digital volume in combination with a wanted output level, the both means of volume apply their own signature to the sound; So far I "gave" you the opportunity to go over the hill and do it digital only, for now assuming that would be good and the best. But this is not necessarily true ! I never tried it but know I should. Otoh, I really like to get rid of the pre-amp (TVC) which is in the way for SQ reasons in general. Ok, on to the next step. |
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
andy74
Audio Loudspeaker
Offline
Posts: 142
|
|
« Reply #33 on: February 19, 2008, 01:20:01 pm » |
|
Peter,
It has just occurred to me that in both of my setups I have a single core CPU so no scheme is applied.
Andrey
|
|
|
|
|
Logged
|
1. USB FreeAgent 500Gb -> P4 2.8 2gb RAM Vista Ult -> XXHE Q1=14 prio both = Normal -> esi juli@ (SPDIF is default device->analog mon in ESI panel->analog outs) -> nad 320BEE->Boston Acoustics cr150 3. IBM thinkpad r52->VIsta Ult XXHE, Unattended playerprio=Nothing threadPrio=Normal -> very cheap usb audio adapter -> shure attenuator -> headphones shure 210 |
|
|
|
Gerard
|
|
« Reply #34 on: February 19, 2008, 02:18:48 pm » |
|
I am not sure but it even looks like there is more seperation between left and right.... |
|
|
|
|
Logged
|
Januari 2017 XX 2.05
OriginAE x11v Home build HTCP ~ Asus x79 mobo 3930K 12 core underclock 500 MHz,
16GB, *Windows 10 Pro 64 bit build 14393.0* *from RAM*, music on music server / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = *0.10* (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core *3-5* / Not Switch Processors during Playback = Off/ Playback Drive *none* (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Not the best (OS from RAM issue) / Time Stability = Off (OS from RAM issue) / Custom Filter Mid 705600 / -> USB3 (Silverstone both sides isolated = Sw#3 of NOS1a = Up) -> *Clairixa USB 15cm* -> Intona Isolator -> Clairixa USB 0.70m -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink ->> Metrum Amps ->> Metrum Acoustics ESL Open Baffle.
|
|
|
andy74
Audio Loudspeaker
Offline
Posts: 142
|
|
« Reply #35 on: February 19, 2008, 07:55:57 pm » |
|
Hi Peter/Russ/All,
I can join Russ' nirvana now!!!
I tried them all from 16/44.1 upto 32/whatever.
And that bad feeling stayed fro all of them untill I came to 24/44.1(192) and voila it sounds without any discomfort and still better than t-7.
I am using 0dB. Don't want to try to bypass preamp for now. Although I have the option on my integrated amp.
But the idea is it sounds good again.
Edit: works only with 32 bit. and with 24 fails
Edit: In the "DAC needs" section
Andrey
PS: Will try to play with my el cheapo card tomorrow. But as I can remeber now it does not support other than 16/44.1 and the bad feeling is there.
|
|
|
|
|
Logged
|
1. USB FreeAgent 500Gb -> P4 2.8 2gb RAM Vista Ult -> XXHE Q1=14 prio both = Normal -> esi juli@ (SPDIF is default device->analog mon in ESI panel->analog outs) -> nad 320BEE->Boston Acoustics cr150 3. IBM thinkpad r52->VIsta Ult XXHE, Unattended playerprio=Nothing threadPrio=Normal -> very cheap usb audio adapter -> shure attenuator -> headphones shure 210 |
|
|
edward
Audio Loudspeaker
Offline
Posts: 129
Let's Be Near . . . The Atmosphere
|
|
« Reply #36 on: February 19, 2008, 08:43:28 pm » |
|
I tried them all from 16/44.1 upto 32/whatever.
And that bad feeling stayed fro all of them untill I came to 24/44.1(192) and voila it sounds without any discomfort and still better than t-7.
I'm a little confused by what you are saying here, and I was just wondering if you could clarify - are you making these comparisons with the same song? I mean, you can't be, right? You can only play 16/44 when 24 and 32 are unchecked in the "DAC needs" section, right? And conversely if "DAC needs" is set to 32bits, then are you playing a 24/96 track? |
|
|
|
|
Logged
|
Home built PC (Zalman TNN-300 Silent Case = Intel E2160 - Dual Core 1.8GHz) => Vista (Home Premium) => RAMDisk => M-Audio Audiophile USB (AK4528 DAC) Latency 128 =>
April 19, 2008
0.9u-14a (Double, No Invert, Mem Unchecked, Volume -24dB ** Q1 = -1 ** Player Priority=Low ** Thread Priority=Realtime ** Core Appointment Scheme-1 ** Unattended)
|
|
|
edward
Audio Loudspeaker
Offline
Posts: 129
Let's Be Near . . . The Atmosphere
|
|
« Reply #37 on: February 19, 2008, 08:46:52 pm » |
|
I'll try to get you something which is for 44.1/16 (ouput !) the most similar to 0.9t. No, please don't take a step backward. I don't want my 16/44.1 output to sound like 0.9t. Am I misunderstanding what you are saying here? |
|
|
|
|
Logged
|
Home built PC (Zalman TNN-300 Silent Case = Intel E2160 - Dual Core 1.8GHz) => Vista (Home Premium) => RAMDisk => M-Audio Audiophile USB (AK4528 DAC) Latency 128 =>
April 19, 2008
0.9u-14a (Double, No Invert, Mem Unchecked, Volume -24dB ** Q1 = -1 ** Player Priority=Low ** Thread Priority=Realtime ** Core Appointment Scheme-1 ** Unattended)
|
|
|
andy74
Audio Loudspeaker
Offline
Posts: 142
|
|
« Reply #38 on: February 19, 2008, 09:20:41 pm » |
|
I am playing regular 16/44.1 cd ripped files.
What I was saying refers to settings area, "DAC is 24 bits 192.0 KHz" combobox not the track formats.
|
|
|
|
|
Logged
|
1. USB FreeAgent 500Gb -> P4 2.8 2gb RAM Vista Ult -> XXHE Q1=14 prio both = Normal -> esi juli@ (SPDIF is default device->analog mon in ESI panel->analog outs) -> nad 320BEE->Boston Acoustics cr150 3. IBM thinkpad r52->VIsta Ult XXHE, Unattended playerprio=Nothing threadPrio=Normal -> very cheap usb audio adapter -> shure attenuator -> headphones shure 210 |
|
|
|
PeterSt
|
|
« Reply #39 on: February 19, 2008, 09:32:28 pm » |
|
Ok, I'm lost.  Later ... (I already changed the program, but I can put things back again, no problem ) |
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
andy74
Audio Loudspeaker
Offline
Posts: 142
|
|
« Reply #40 on: February 19, 2008, 09:37:20 pm » |
|
Peter,
For those with 16/44.1 only cards, ok namely for me (my other setup), please make that special version, which you already changed.
Thanks
Andrey
|
|
|
|
|
Logged
|
1. USB FreeAgent 500Gb -> P4 2.8 2gb RAM Vista Ult -> XXHE Q1=14 prio both = Normal -> esi juli@ (SPDIF is default device->analog mon in ESI panel->analog outs) -> nad 320BEE->Boston Acoustics cr150 3. IBM thinkpad r52->VIsta Ult XXHE, Unattended playerprio=Nothing threadPrio=Normal -> very cheap usb audio adapter -> shure attenuator -> headphones shure 210 |
|
|
|
PeterSt
|
|
« Reply #41 on: February 19, 2008, 09:50:33 pm » |
|
Not so fast ... First I want to understand what happened whith your other setup. As far as I can tell Edward must be right ... |
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
dinamanu
Audio Loudspeaker
Offline
Posts: 9
|
|
« Reply #42 on: February 19, 2008, 09:52:46 pm » |
|
I vote for XX volume |
|
|
|
|
Logged
|
Vistabusiness,hw all DIY: PC>AYAII 1541UsbDac>Truepath>Ellam
|
|
|
andy74
Audio Loudspeaker
Offline
Posts: 142
|
|
« Reply #43 on: February 19, 2008, 10:00:54 pm » |
|
Not so fast ... First I want to understand what happened whith your other setup. As far as I can tell Edward must be right ... Indeed I used 2 -3 songs in 16/44.1 format and with these songs I went through all settings from DAC is 16/44.1 to DAC is 32/192 with DAC needs 32 bits. And for all settings I was able to hear my 16/44.1 songs with no errors. Now regarding that bad feeling of mine: All settings except for 24/* gave me taht bad feeling. But 24/* is just perfect. Does this help? |
|
|
|
|
Logged
|
1. USB FreeAgent 500Gb -> P4 2.8 2gb RAM Vista Ult -> XXHE Q1=14 prio both = Normal -> esi juli@ (SPDIF is default device->analog mon in ESI panel->analog outs) -> nad 320BEE->Boston Acoustics cr150 3. IBM thinkpad r52->VIsta Ult XXHE, Unattended playerprio=Nothing threadPrio=Normal -> very cheap usb audio adapter -> shure attenuator -> headphones shure 210 |
|
|
|
PeterSt
|
|
« Reply #44 on: February 19, 2008, 10:19:25 pm » |
|
Clear Andrey.
|
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
|
