coliny
Audio Loudspeaker
 Offline
Posts: 184
|
 |
« on: December 29, 2015, 10:45:24 am » |
|
I noticed a few days ago in minOS at bottom right of screen there was watermark:- Test Mode W10 Pro Build 10586 Today I noticed an additional water mark asking me to activate W10. I had previously activated W10 with my W7 license key. Booted back to normOS, Test Mode watermark still displayed. Checked via SYSTEM and W10 is still activated. Non of this has stopped W10 operating, but my question is should I leave it in Test Mode or apply fix to come out of Test Mode ? https://msdn.microsoft.com/en-us/library/windows/hardware/ff553484%28v=vs.85%29.aspx |
|
|
|
|
Logged
|
Apr'20 :- XX2.11/W10_14393.0, MachIII RAM-OS, Music PC, RDC control by W10 Netbook, Ram Disks, min OS ,Engine#4 Adaptive Mode / Dev.Buffer = 4096 / Decode HDCD / Playerprio = Low / ThreadPrio = RT / Scheme = *Core 3-5* / Switch Processors during Playback / ClockRes = 15ms / XTweaks : Balanced Load = 34 / Nervous Rate = 10 / Cool when Idle = 0 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Q1/-/3/4/5 = 30/-/1/1/1/ Q1Factor = 1 / Memory = Straight Contiguous / SFS = 10 / Include Garbage Collect / UnAttended /Do Not Start Playback / All Services Off / Monitor off @ unattended / Custom Filter192 Sample Rate /Minidsp SHD Studio with DIRAC / -> 24 bit DDDAC1794 NOS DAC -> Quad ESL989 with upgrades and PV1 Subwoofer
|
|
|
|
PeterSt
|
|
« Reply #1 on: December 29, 2015, 10:58:51 am » |
|
Colin,
The Testmode indication is indeed from Driver Signing (shut off). Do notice that this is an option in XXHighEnd (in Settings, Output section). Now my question :
Did you use that or is it a W10 quirk ?
It is hard for me to test/check, because I need it already at installing the OS. But at some stage I wondered ...
Then, I am not sure whether you are confusing two subjects. I mean, you seem to relate this Testmode with not being activated. But it isn't. Your "issue" will be :
When in MinOS this is always the case ( I think since Windows 8 ). So say that the service which is checking your Windows activation, is not running. This is not on purpose whatsoever and is just part of "minimising" the OS as far as possible.
I think it appears only after two days.
Anyway : no issue anywhere, regarding this (the both).
Peter
|
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
coliny
Audio Loudspeaker
Offline
Posts: 184
|
|
« Reply #2 on: December 29, 2015, 11:37:57 am » |
|
Hi Peter
Must have been me changing the Driver Signing in XXHE for no good reason.
I tried changing it back via XXHE/normOS but after reboot it was still in test mode.
From cmd I executed the command to turn off testmode & rebooted. This got me out of testmode, but xxhe still says "drivers need not be signed" !
Thanks
Colin
|
|
|
|
|
Logged
|
Apr'20 :- XX2.11/W10_14393.0, MachIII RAM-OS, Music PC, RDC control by W10 Netbook, Ram Disks, min OS ,Engine#4 Adaptive Mode / Dev.Buffer = 4096 / Decode HDCD / Playerprio = Low / ThreadPrio = RT / Scheme = *Core 3-5* / Switch Processors during Playback / ClockRes = 15ms / XTweaks : Balanced Load = 34 / Nervous Rate = 10 / Cool when Idle = 0 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Q1/-/3/4/5 = 30/-/1/1/1/ Q1Factor = 1 / Memory = Straight Contiguous / SFS = 10 / Include Garbage Collect / UnAttended /Do Not Start Playback / All Services Off / Monitor off @ unattended / Custom Filter192 Sample Rate /Minidsp SHD Studio with DIRAC / -> 24 bit DDDAC1794 NOS DAC -> Quad ESL989 with upgrades and PV1 Subwoofer
|
|
|
|
PeterSt
|
|
« Reply #3 on: December 29, 2015, 11:44:15 am » |
|
Hmm ... that is odd.
Can you show me a screencopy of your BCDEdit output for the OS of concern ?
|
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
coliny
Audio Loudspeaker
Offline
Posts: 184
|
|
« Reply #4 on: December 29, 2015, 11:57:11 am » |
|
bcdedit output attached
|
|
|
|
Logged
|
Apr'20 :- XX2.11/W10_14393.0, MachIII RAM-OS, Music PC, RDC control by W10 Netbook, Ram Disks, min OS ,Engine#4 Adaptive Mode / Dev.Buffer = 4096 / Decode HDCD / Playerprio = Low / ThreadPrio = RT / Scheme = *Core 3-5* / Switch Processors during Playback / ClockRes = 15ms / XTweaks : Balanced Load = 34 / Nervous Rate = 10 / Cool when Idle = 0 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Q1/-/3/4/5 = 30/-/1/1/1/ Q1Factor = 1 / Memory = Straight Contiguous / SFS = 10 / Include Garbage Collect / UnAttended /Do Not Start Playback / All Services Off / Monitor off @ unattended / Custom Filter192 Sample Rate /Minidsp SHD Studio with DIRAC / -> 24 bit DDDAC1794 NOS DAC -> Quad ESL989 with upgrades and PV1 Subwoofer
|
|
|
|
PeterSt
|
|
« Reply #5 on: December 29, 2015, 12:22:29 pm » |
|
In itself it is great that you sent that because now I can see that something odd and I already wondered whether I had done that ... not, as it seems. Look at the DDISABLE_INTEGRITY_CHECK and mind the double D (must be from Double Dutch  ). That doesn't beling there. But it will also be the reason that this option won't be removed by itself. I am looking for DISABLE_INTEGRITY_CHECK, which is not there ... Anyway it is the reason that XXHighEnd still shows it as "Need not be signed". Don't ask me at this moment what this line does on its own. But I apply this, and the other (and of course at this moment I forgot why). You can do this, although I wonder whether it works out ... : BCDEdit /deletevalue loadoptions |
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
|
PeterSt
|
|
« Reply #6 on: December 29, 2015, 12:31:10 pm » |
|
Colin,
I now see that something else must be going on as well :
I have a typo in my deletevalue of the testsigin <-- command.
So it looks like that won't get deleted because it does not exist (testsiging does).
Quite a few coincidences.
Anyway, thank you !!
Peter
|
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
|
