|
Stanray
|
 |
« on: June 27, 2013, 08:53:05 pm » |
|
Please place this in another thread if its too off topic. I created two virtual drives with IMDisk: (a:) for XXHighEnd and XXData (b:) for Playback Drive I did this in Normal OS. When I start XXHE all is working fine, but when I Minimise OS the virtual disks are gone  What did I do wrong ?  Thanks. Stanley |
|
|
|
|
Logged
|
AudioPC: Passive Intel i7-2600S / Hyperthreading On / Motherboard: Asus P8H67-V/ RAM: Kingston DDR3 32GB/ Motherboard USB3.0 to NOS1a / PSU: Silentmaxx Fanless II/ no computer cabinet and no fans (NoFan 80 EH passive CPU cooler) / Music via LAN on SSD on MusicServerPC (desktop computer-W10)/ All music in WAV /Control on desktop computer or on Macbook Air <-> Wifi <-> separate (audio)router <-> LAN <-> MusicServerPC <-> LAN <-> AudioPC.
September 2021: Windows 10 Pro 64 bit build 14393.0 from RAM/ XXHE 2.11 / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/1 / Q1Factor = 4/ Dev.Buffer = 4096 / ClockRes = 10ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 10.13 (max 10,13)/ No Filter/ not Invert / Phase Alignment Off / Peak Extend Off /Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback/ UnAttended / All Services Off / Minimize OS / XTweaks : 62, 1, -, 1, 1/ Time Performance Index = Optimal / Time Stability = On / Custom Filtering Low (16x) / -> Lush^3 USB-cable 70cm (A: W-Y-R-G, B: W-G) > Phasure NOS1a 75B G3 DAC, Driver v1.0.4) (16ms)/ Output via Balanced Blaxius BNC Interlinks > Audio Analogue Maestro monoblock amplifier > speakers: Apogee Acoustics Scintilla (custom rebuild).
|
|
|
|
AlainGr
|
|
« Reply #1 on: June 27, 2013, 10:54:08 pm » |
|
Hi Stanley, I hope I got the question correctly... Since the ramdisk is in memory (ram), it needs to be re-created each time the pc is booted... Since Minimize OS requires a reboot, you will have to create your 2 drives again and copy XXHE and XXDATA as you did the first time... It also means that if you modify any parameter in XXHE while using the copy in the ramdrive, you will have to copy back XXHE over the original folder (on the physical drive) and (I guess) XXDATA also... There are different scenarios that can be prepared to spare you the trouble each time. One of them could be a "batch" file... Maybe a thread for this could be started (Peter ?)  Regards, Alain |
|
|
|
|
Logged
|
Desktop with ASUS Sabertooth X79 motherboard,Intel 3930k 6 cores (+ 6) at 1.2 GHZ,32GB ram 1333Mhz,Win 10 pro build 14386 64 bit with no updates,OS + XXHE on external Sata III SSD (Esata), music (WAV) on external 5200 rpm drive through network, OS MInimized, XX with engine 4 adaptive,4096 (buffer size), CPU with scheme 3,Player = Low,Thread = RealTime, Q1 = 14,Q345 = 1,1,1,Q1x=1,Clock res = (variable),Stop Desktop Services,Stop Remaining Services,Stop Wasapi,,LAN on,persist = on,all OSD off,SFS = 2,PE off,PA off, Arc Prediction,x16 Upsample, Straight Contiguous,Lush USB cable,Phasure NOS1a DAC,Meitner PA-6 preamp, Spectral Audio DMA-180 Power Amp, Tannoy System 15 DMT II, Tannoy St-100 supertweeters, Tannoy TS2.12 subwoofers (2). * On hiatus for a while...
|
|
|
|
PeterSt
|
|
« Reply #2 on: June 28, 2013, 07:29:41 am » |
|
Please place this in another thread if its too off topic. Couldn't be more  So I did. |
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
|
Stanray
|
|
« Reply #3 on: June 28, 2013, 09:41:42 am » |
|
I hope I got the question correctly... Since the ramdisk is in memory (ram), it needs to be re-created each time the pc is booted... Since Minimize OS requires a reboot, you will have to create your 2 drives again and copy XXHE and XXDATA as you did the first time...
It also means that if you modify any parameter in XXHE while using the copy in the ramdrive, you will have to copy back XXHE over the original folder (on the physical drive) and (I guess) XXDATA also...
There are different scenarios that can be prepared to spare you the trouble each time. One of them could be a "batch" file...
Thanks Alain, I was confused because I used the RAMdisk program in the past. RAMdisk however saves a disk image at shutdown and loads this image at startup. Not so with IMdisk. . . Stanley |
|
|
|
|
Logged
|
AudioPC: Passive Intel i7-2600S / Hyperthreading On / Motherboard: Asus P8H67-V/ RAM: Kingston DDR3 32GB/ Motherboard USB3.0 to NOS1a / PSU: Silentmaxx Fanless II/ no computer cabinet and no fans (NoFan 80 EH passive CPU cooler) / Music via LAN on SSD on MusicServerPC (desktop computer-W10)/ All music in WAV /Control on desktop computer or on Macbook Air <-> Wifi <-> separate (audio)router <-> LAN <-> MusicServerPC <-> LAN <-> AudioPC.
September 2021: Windows 10 Pro 64 bit build 14393.0 from RAM/ XXHE 2.11 / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/1 / Q1Factor = 4/ Dev.Buffer = 4096 / ClockRes = 10ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 10.13 (max 10,13)/ No Filter/ not Invert / Phase Alignment Off / Peak Extend Off /Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback/ UnAttended / All Services Off / Minimize OS / XTweaks : 62, 1, -, 1, 1/ Time Performance Index = Optimal / Time Stability = On / Custom Filtering Low (16x) / -> Lush^3 USB-cable 70cm (A: W-Y-R-G, B: W-G) > Phasure NOS1a 75B G3 DAC, Driver v1.0.4) (16ms)/ Output via Balanced Blaxius BNC Interlinks > Audio Analogue Maestro monoblock amplifier > speakers: Apogee Acoustics Scintilla (custom rebuild).
|
|
|
|
AlainGr
|
|
« Reply #4 on: June 28, 2013, 12:15:41 pm » |
|
Hi Stanley,
I think Imdisk can do the same, but I haven't explored this aspect of things yet. I took a different path with a batch file that creates the ramdrives each time I boot. But I have to click on the batch file each time... It can also be put in the Task Scheduler...
Regards,
Alain
|
|
|
|
|
Logged
|
Desktop with ASUS Sabertooth X79 motherboard,Intel 3930k 6 cores (+ 6) at 1.2 GHZ,32GB ram 1333Mhz,Win 10 pro build 14386 64 bit with no updates,OS + XXHE on external Sata III SSD (Esata), music (WAV) on external 5200 rpm drive through network, OS MInimized, XX with engine 4 adaptive,4096 (buffer size), CPU with scheme 3,Player = Low,Thread = RealTime, Q1 = 14,Q345 = 1,1,1,Q1x=1,Clock res = (variable),Stop Desktop Services,Stop Remaining Services,Stop Wasapi,,LAN on,persist = on,all OSD off,SFS = 2,PE off,PA off, Arc Prediction,x16 Upsample, Straight Contiguous,Lush USB cable,Phasure NOS1a DAC,Meitner PA-6 preamp, Spectral Audio DMA-180 Power Amp, Tannoy System 15 DMT II, Tannoy St-100 supertweeters, Tannoy TS2.12 subwoofers (2). * On hiatus for a while...
|
|
|
phantomax
Audio Loudspeaker
 Offline
Posts: 163
|
|
« Reply #5 on: June 28, 2013, 12:25:48 pm » |
|
Maybe someone can help with this, is advisable cosume 3 Gb in RAM discs on a PC with 6Gb only (I could expand up to 8 Gb)? I expected better sound with the ImDisks but I think it sounds slightly worse. A compromise solution I am going to try is use a single 1Gb IMDisk for XXHE and we'll see.
Maxi
|
|
|
|
|
Logged
|
Audio PC -> AsRock Z79 intel i-3 4170 @~800MHz, 16GB, Windows 10 64 bit build 14393.0 from RAM, DIY Linear Power Supply. music on LAN /
Engine#4 Special Mode/Q1/-/3/4/5=*30*/-/*1*/*1*/*1*/ Q1Factor = *5* / Dev.Buffer = 1024 /ClockRes = *15ms* /Memory = Straight Contiguous / Include Garbage Collect /
SFS = *0,69* (max 0,69 / Phase Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 1-3 / Not Switch Processors during Playback = Off/ Playback
Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / *OSD Off* / Running Time Off / Minimize OS / XTweaks : Balanced Load = 35 / Nervous Rate = 10 / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Not the best / Time Stability = not stable / *Custom Filtering low for 176400* / Always Clear Proxy before Playbck = On -> Modified Audiotrak Prodigy HD2 internal soundcard with analog tube buffer (Broskie cathode follower) -> Passive biamplification: Canary Audio CA-301 MkII for highs- mids and Counterpoint SA-100 for lows -> Audiovector M-3 Super / modified Musical Fidelity X-3 (6h6p tubes) -> Grado 1000 headphones.
|
|
|
|
AlainGr
|
|
« Reply #6 on: June 28, 2013, 12:53:15 pm » |
|
Hi Maxi, I can't tell if adding 2GB of ram will improve SQ, but it would probably not make things worse I have set my ramdrive at 2GB (I have 16GB ram), but I do not put a lot of music in a row. Of course, this is just me, but all depends on how a person prefers to play his music Regards, Alain |
|
|
|
|
Logged
|
Desktop with ASUS Sabertooth X79 motherboard,Intel 3930k 6 cores (+ 6) at 1.2 GHZ,32GB ram 1333Mhz,Win 10 pro build 14386 64 bit with no updates,OS + XXHE on external Sata III SSD (Esata), music (WAV) on external 5200 rpm drive through network, OS MInimized, XX with engine 4 adaptive,4096 (buffer size), CPU with scheme 3,Player = Low,Thread = RealTime, Q1 = 14,Q345 = 1,1,1,Q1x=1,Clock res = (variable),Stop Desktop Services,Stop Remaining Services,Stop Wasapi,,LAN on,persist = on,all OSD off,SFS = 2,PE off,PA off, Arc Prediction,x16 Upsample, Straight Contiguous,Lush USB cable,Phasure NOS1a DAC,Meitner PA-6 preamp, Spectral Audio DMA-180 Power Amp, Tannoy System 15 DMT II, Tannoy St-100 supertweeters, Tannoy TS2.12 subwoofers (2). * On hiatus for a while...
|
|
|
|
|
|
PeterSt
|
|
« Reply #8 on: June 28, 2013, 02:17:04 pm » |
|
Joachim,
I won't say it is easy to so, but if you follow ALL what's written about it, you will see that there's much context.
This starts (today) with Windows 8 and quite some derivals of that.
So it's not much useful to refer to years back, plus - without reading - the reason to not use a RAMDisk per the topic you linked to has a context just the same. This already starts by everybody using 64 bits today, while back then this was not common at all and not more than 4GB could be in a system anyway.
So it is not so difficult to understand how views can change. And how environments change which make views change. And how an OS can encourage for it. And ... blahlahblah.
Regards,
Peter
|
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
nik.d
Audio Loudspeaker
Offline
Posts: 178
|
|
« Reply #9 on: June 28, 2013, 03:31:44 pm » |
|
@stanrey Stanley, there is ImDisk Toolkit with which you 'll be able to load RAMdisk at computer startup. Link: http://reboot.pro/files/file/284-imdisk-toolkit/However I could not make it load two disks - similar to Dataram's (RAMdisk) free software limitation(s). Simple solution to that: Install & run both apps Dataram's app needs be installed while in full OS. There's no need keeping content (creating disk image) of Playback drive - it's content is emptied while exiting XXHE. Suggestion: As IMdisk is regarded 'better' or simply faster than Dataram's one, use Dataram's RAMdisk for XXHE and XXData folders and ImDisk for 'Playback disk' role. Back in 2011 it was advised to format this disk w/ smallest cluster - 0,5KB NTFS. George |
|
|
|
|
Logged
|
XXHE 2.11a / W10 14393.0 / Asrock Extreme4-M, Xeon E5-2648L, 16GB DDR3 / NOS1, Starcrimson GaNFET monoblocks, GR Research 'Venuette' OB
|
|
|
|
AlainGr
|
|
« Reply #10 on: June 28, 2013, 05:22:57 pm » |
|
Hi George,
I was not aware of this toolkit - but thanks !
In the meantime, I do have 2 ramdrives as presented by Peter - one being for playback and one for XXHE and xxdata. As of yet, I haven't done anything about data recuperation, so nothing is saved between reboots since all sits in ram and I have concerns about what to recuperate without risking to generate errors...
I am preparing a batch file with a little documentation to allow for ramdrive creation. As of now, it will be minimalist, with space for improvement through time.
I will do this in the following times and post it in the "Playback Tweaks" category. Sorry if it takes some time though, because doing something for myself and suggesting it to others has its limitations (...).
Regards,
Alain
|
|
|
|
|
Logged
|
Desktop with ASUS Sabertooth X79 motherboard,Intel 3930k 6 cores (+ 6) at 1.2 GHZ,32GB ram 1333Mhz,Win 10 pro build 14386 64 bit with no updates,OS + XXHE on external Sata III SSD (Esata), music (WAV) on external 5200 rpm drive through network, OS MInimized, XX with engine 4 adaptive,4096 (buffer size), CPU with scheme 3,Player = Low,Thread = RealTime, Q1 = 14,Q345 = 1,1,1,Q1x=1,Clock res = (variable),Stop Desktop Services,Stop Remaining Services,Stop Wasapi,,LAN on,persist = on,all OSD off,SFS = 2,PE off,PA off, Arc Prediction,x16 Upsample, Straight Contiguous,Lush USB cable,Phasure NOS1a DAC,Meitner PA-6 preamp, Spectral Audio DMA-180 Power Amp, Tannoy System 15 DMT II, Tannoy St-100 supertweeters, Tannoy TS2.12 subwoofers (2). * On hiatus for a while...
|
|
|
|
christoffe
|
|
« Reply #11 on: June 28, 2013, 05:23:54 pm » |
|
Joachim,
I won't say it is easy to so, but if you follow ALL what's written about it, you will see that there's much context.
This starts (today) with Windows 8 and quite some derivals of that.
So it's not much useful to refer to years back, plus - without reading - the reason to not use a RAMDisk per the topic you linked to has a context just the same. This already starts by everybody using 64 bits today, while back then this was not common at all and not more than 4GB could be in a system anyway.
So it is not so difficult to understand how views can change. And how environments change which make views change. And how an OS can encourage for it. And ... blahlahblah.
Regards,
Peter
Ok, there is another link http://www.phasure.com/index.php?topic=1592.0As far as I can remember, the OS was not the main issue for a minor SQ, it was the storage media. Joachim |
|
|
|
|
Logged
|
|
|
|
|
PeterSt
|
|
« Reply #12 on: June 28, 2013, 05:32:19 pm » |
|
Hey Joachim, So indeed, Storage Media which I don't use. Do you get it now ? (no probably not, because you missed that; but no worries ... but no discussion either. ) Regards, Peter |
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
|
CoenP
|
|
« Reply #13 on: July 02, 2013, 09:58:20 am » |
|
Hi, I installed one IMDisk with this tool and check "launch at Windows startup", than I mounted another IMDisk with the "IMDisk Virtual Disk Driver" utility. I don't know if the above has anything to do with it, but both drives are installed at the WIN8 boot. Bug or feature....?! If you are into using the two IMdisk drives than this could be convenient. regards, Coen |
|
|
|
|
Logged
|
Settings: Qn: , SFS: , timeres: XT tweaks: , buf: 4096, driver: 8 ms,
Audio PC (jan 19): XXHE PC v1 with RAMdisk w.o. videocard and 1 of 2 cpu fans + BRIX/USB3 storage musicserver. ETN to Fibre converters (linear supplies), 500m SFP modules & 5m OM4 cable. Power cable PE not connected, together with nos1 and poweramp in separate "audio" powerstrip.
Clarixa set + Intona (or Lush 1m), Phasure NOS1a-75B G3 USB (buf 16 ms)-> Blaxius ->SE EL95 (0,8W triode) + cheap link to Abaqus 300W plateamps> Bastanis cable-> Bastanis Sagarmatha Duo ("DIY").
[other sources: TD124/3009SII-i/Grace F9/lounge LCR phono; Rega Planet 1997 vintage]
|
|
|
nik.d
Audio Loudspeaker
Offline
Posts: 178
|
|
« Reply #14 on: July 02, 2013, 10:28:49 pm » |
|
Hi Coen, Nice finding. I'm using 'Primo Ramdisk'. With IMDisk another utility - 'Rawcopy' is needed to keep RAMdisk(s) content over PC restarts. Task Manager is not running in minOS for process automation so I went 'easier way' Brds, George Edit: Oups, Task Scheduler IOF Task Manager |
|
|
|
|
Logged
|
XXHE 2.11a / W10 14393.0 / Asrock Extreme4-M, Xeon E5-2648L, 16GB DDR3 / NOS1, Starcrimson GaNFET monoblocks, GR Research 'Venuette' OB
|
|
|
|
