XXHighEnd - The Ultra HighEnd Audio Player
November 23, 2024, 06:31:40 am *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: August 6, 2017 : Phasure Webshop open ! Go to the Shop
Search current board structure only !!  
   Home   Help Search Login Register  
Pages: [1] 2  All
  Print  
Author Topic: The Perfect Room  (Read 46428 times)
0 Members and 0 Guests are viewing this topic.
christoffe
Audio Addict
***
Offline Offline

Posts: 762


View Profile Email
« on: February 11, 2013, 12:02:45 pm »

http://www.phasure.com/index.php?topic=2421.msg25316#msg25316

This notes by Peter are leading us into a blind alley and we do not get the best out of our system, to listen to pure music.

In general we need a basis, a reference configuration of our listening room with the speakers.   
We need a balance with
-   the direct sound from the loudspeakers
-   the discrete early reflections from the floor, ceiling and side walls
-   and the reverberation time
etc.,etc.

Nice to read is the homepage of:
http://www.soundfountain.com/amb/speaker.html
 and amongst many other literature
“The complete Guide to High –End Audio” by Robert Harley, chapter 4

With this reference configuration of our SYSTEM (room and speakers) we are in a position to compare ……. , ONLY THEN we hear the pure sound of the music in OUR room!!!
The room must sound right at first, and so I can hear the differences of any audio software and components etc.

Joachim

PS
http://greenmountainaudio.com/room-acoustics/how-to-have-the-best-sound-in-your-room.html
http://www.linkwitzlab.com/rooms.htm
http://www.crutchfield.com/S-BKLmRBEhla1/learn/learningcenter/home/speakers_roomacoustics.html
http://www.whatsbestforum.com/showthread.php?9457-new-home-for-my-Magico-Q1
http://www.ultraaudio.com/index.php/features-menu/opinion-menu/312-music-vault-2-0-and-the-value-of-a-reference-listening-room
« Last Edit: February 13, 2013, 05:46:27 am by christoffe » Logged
boleary
Crazy Audiophile
****
Offline Offline

Posts: 1233


View Profile Email
« Reply #1 on: February 13, 2013, 02:26:38 pm »

Joachim, thanks for the links. I've been pouring over them and they are mostly great reading. In terms of Peter's thoughts on room accoustics/treatments all I can say is I very much appreciate his pioneering spirit and willingness to go against traditional thinking. Out of that spirit came the NOS1 which, I hope we all agree,  sounds so incredible.

On the other hand, my very modest system was taken into another league entirely when I began experimenting with my home-made accoustic panels (3 and 6 lb per square inch, rigid fiberglass, 2 x 4' panels) Last weekend I had a member of the Philadelphia Area Audio Group over, he's a very big "progressive rock" guy. I played "Heart of the Sunrise" from Yes's Fragile album. The guy went banannas. Said he never heard the track sound so good with either vinyl or cd anywhere before. He particularly liked the vocals which emerge out of the music several minutes into the track (W7 OS of course).  My version was an early 90's red book cd ripped to the hard drive. This is a guy who has spent his "audio career" listening to systems that cost 10 to 20 times more than my system. I know he would not have thought so highly of the sound without the accoustic panels in the room!
Logged

XX2.07/MB: ASRock Extreme 4M , i7-3930K @ 0.5GHz/ RAM-OS W10586/32 Gigs 1600 DDR3/ Clarixa usb cable  /Q1,3,4,5 = *14*/1/1/*1* / *Q1Factor = 1* / Peak Extension: Off/Dev.Buffer = 4096 / ClockRes = *.5ms* / Straight Contiguous / SFS = *.02,/ Do Nothing With Cover Art / not Invert / *(Phase Alignment Off  / Playerprio = Low / ThreadPrio = Real Time / Scheme = 3-5 / UnAttended (Just Start) / *All* Services Off except LAN & RDC/ Persist off/No OSD / No Running Time / Minimize OS / Boost on/XTweaks : Balanced Load = *40* / Nervous Rate = 1/ Cool when Idle = NA / Provide Stable Power = 0 / Utilize Cores always = 1 / Time Performance Index = Best/ Time Stability = On/ No Up-sampling/R-2R DAC
BertD
Audio Enthusiast
**
Offline Offline

Posts: 422


Only the Best!


View Profile WWW Email
« Reply #2 on: February 13, 2013, 03:34:15 pm »

With this reference configuration of our SYSTEM (room and speakers) we are in a position to compare ……. , ONLY THEN we hear the pure sound of the music in OUR room!!!

Exactly, your room or everybody else’s own room because that is their reference. If your room is perfect and another one is not then the sound will probably be unbearable as it does not represent your own listening room.

Sure the room is important but since it is a personal reference then the differences made to the equipment in THAT room should be noticeable just the same so let’s agree that I do not agree with you here.

Never the less it is very much advisable to have a perfect room as it will only make the sound better and less distracting in the end...

Bert
Logged

Februari 1st: RDC controlled i7-4785T (set to 800Mhz - fully passive design without any moving parts), 16GB RAM / XXHighEnd 2.04c on 2GB RAMDisk (IMDisk) / Windows 10 Pro 10586.0 X64 on internal 250GB SSD / Music on external NAS / Playback Drive 10GB RAMDisk (IMDisk) / SFS 0.10 / Barbone Industrial Intona > Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) > Blaxius BNC interlink > BD-Design BD30-SPR amplifiers > BD-Design Custom Made Sigma loudspeakers.

XX settings basically similar to PeterSt's
fas42
Audio Loudspeaker
*
Offline Offline

Posts: 20


View Profile
« Reply #3 on: February 14, 2013, 02:07:40 am »

I will just note here, so not to offend anyone any more than necessary, that I'm 100% on Peter's side. He is not the "only" one that thinks that way, we may dispute who was first or the best ways to get the "good stuff", but that's another ball game ... smile

One way of looking at it, is that the sound when it emerges from the speaker drivers has to be "right". If it's not, then you need to start playing games with room acoustics, etc, etc, etc, to "improve" things  ...

Frank
Logged
christoffe
Audio Addict
***
Offline Offline

Posts: 762


View Profile Email
« Reply #4 on: February 14, 2013, 10:02:11 am »

I will just note here, so not to offend anyone any more than necessary, that I'm 100% on Peter's side. He is not the "only" one that thinks that way, we may dispute who was first or the best ways to get the "good stuff", but that's another ball game ... smile

One way of looking at it, is that the sound when it emerges from the speaker drivers has to be "right". If it's not, then you need to start playing games with room acoustics, etc, etc, etc, to "improve" things  ...
Frank

Hi Frank and Peter,

let us answer the question of the original source of the music! The music is recorded in a studio or opera etc.

A picture of a new concert hall in Copenhagen see:
http://admin.medite-europe.com/imagebank/59.jpg

The sound in the studio or concert hall must sound right at first,
and then the sound engineers are mixing the record in their studio,
and in their studio the sound must be right too.
We hear the result of the recording engineers at our speaker drivers via our frontend.

Let us assume our listening room is ultra modern and all walls around are glas walls, no curtains around. Then I promise ............... .

Another link:
http://www.acoustics.salford.ac.uk/acoustics_info/studio_design/

Joachim
Logged
fas42
Audio Loudspeaker
*
Offline Offline

Posts: 20


View Profile
« Reply #5 on: February 14, 2013, 10:45:58 am »

Joachim, what you say makes sense, if looked at at a simple physical level. However, what I've personally found is that the ear/brain is a very powerful processing engine, an ultra sophisticated DSP in its own right. And that it can adjust the sound so that it all makes sense, subjectively compensate for peculiarities, anomalies, even complete "wrongness" of the listening environment, such that it all comes together in your mind.

But, it can only do this if the sound image projected from the speakers is clean enough, low enough in distortion. All the detail in the recording has be extracted and reproduced, without too severe a film or veil then added on by the reproduction components. If the workload for the brain to decode the musical picture is too great, because these conditions are not met, then the soundstaging needs assistance - by, playing with the room acoustics as you suggest.

For most people this would probably need to be experienced for a decent period of time to really make sense: many years ago a keen audiophile came and listened to a just reasonable version of what I'm talking about. For the first hour or so he was quite fidgety, the sound didn't make sense to him, he was trying to judge it by the normal thinking. "Your room is completely wrong, you've got glass down one side, wood shelving on the other!" Finally, it clicked, and he relaxed, went with the flow and enjoyed himself ...

Frank
Logged
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16854



View Profile Email
« Reply #6 on: February 14, 2013, 10:52:28 am »

We can also try to put this in another way :

When things sound bad/wrong etc. etc., the very first thing "we" learned is : it will be the room. It is our very first huge excuse.

Never EVER I have seen this proven to be correct.

Now let's keep in mind : everybody reading this will not agree. I know that, and it's okay. However :

When you really want to proceed in audio you must NOT come up with this excuse. It will hold you back forever.
Of course, the room sizes must be adequate. The room is not allowed to inherently ring.

It is also good to keep in mind that without exception I ran into, we audiophiles ALWAYS blame the room. This makes anyone coming up with proof by means of tests and papers and articles etc. etc. right.
And still, when this is the attitude you will get nowhere.

Again without exception, when I run into a situation where things don't sound right and the room is blamed, I *will* find something which just is wrong and it is not the room.
In 100% cases it went like that.

Those who followed the "First Windows 8 experience" topic can see how I for the very first time in over 5 years "had to" touch my speakers because perceivedly they could be better positioned. It helped.
So it helped. But nothing was right and it can't be made right, and all I did was violating my own rule. read through that topic and see the exact sequence of happenings, and how I started to violate my own rule because I wanted a way out.

It is the wrong thing to do, because you will NOT get there; When things are wrong they are wrong and you are not to solve that by tweaking the room. But ... do so, and know that you will have destroyed forever.

We audiophiles are so freaking ignorant on these subjects, that a person listening to my "system" was able to tell me that I should move my speakers such and so and whatnot, while I could exactly point out what was wrong, how it should be, how it can't be so that moving speakers will help "because" etc., while out of all this same person knows my sound from earlier times (which was just W7).

Do we get it now ? Even with person to person speaking, me knowing exactly what I am doing, STILL we ignorant pricks blame the room. And so I am not going to convince you by means of posting in a forum.

Quote from: BertD
Sure the room is important but since it is a personal reference then the differences made to the equipment in THAT room should be noticeable just the same so let’s agree that I do not agree with you here.

A bit hard to see the merits of this, but I think I know what Bert means. But do notice please : Bert is a person who always "fights" with speakers and get good sound from them. Obvious, when it is your work and goal for life. But the same Bert blamed his room wherever he could when something was not right or optimal in the filter department, up to not-so working out designs. I didn't count, but it can well have happened 50 times (I am serious) that something did not work because of "the room" according to Bert, who indeed does not have an optimal listening room. As many times (same 50) I said "no !" and while in half of the times we could find a  culprit, the other half could be split in an "undoable for this design" or "see ? all works now".

It can not be explained, other than trying to point at reality;
Bert's current speakers (see his avatar for one of them) were designed with a "no limits" idea. They should exhibit the best of the very best, and size of them nor room where they could end up in later should be limiting. And mind you, part of this is 4 15" woofers per side, so don't think this is not challenging for rooms;

It may not be of the most importance, but the design includes things which have not been done before, but which "things" exactly would eliminate the room influence. Good or bad. Positioning them right in a corner when you like - it doesn't matter a thing. Point is :

This was all well thought over, and while other designs needed attention to every nasty corner of every nasty room, this time we could 100% see it would work and no prerequisites would be needed.
And it just worked.
You want to play at 130dBSPL ? go ahead. No room will react to it. Even Bert's own room is right and stays so at any level.


It may be hard to see the relation with the subject, but what I tried to point out with the above, is that it is ALL about the source. Source = Audio System and System does not include the room. For the final result yes, but the audio system does not include the room. How could it, when made by manufacturers.

How could it ? Ha ! By making it independent of it. This is what I explicitly do with XHighEnd, this is what I more explicitly *can* do with the NOS1 DAC, this is what we do with very neutral GainClones and this is what can be done by well designed speakers.

I'm fairly sure I can convince you of this :
Wrongly designed audio gear will exhibit its wrongness. I'm sure we all think it is hard to point out how by means of a forum post, but outside of sheer distortion it is easy : it buzzes because it can't keep its things together, so to speak. But the buzzing are standing waves (trust me !) in all frequencies, and now what would happen when the audio manufacturer first decorates his room to in finesse, and then listens to his product. It may sound great.
Remove the decoration and it sounds awful. Ah. Why ? well because it is an awful product. Make it a good product and the decoration is not needed.

If you don't believe the above you are an ignorant audiophile. Why ? well, because a couple of manufacturers who go for the best only AND created that, tell you.

So how ignorant can an audiophile be ? How much can he be stuck in old school thinking ?


All right. Through this post I only wanted to make clear that I don't agree with a couple of things, but that it is not wrong to have another idea than I do, and that it certainly is not so that you are not allowed to vent those ideas. Only two or three will agree with it anyway.

Regards,
Peter


PS: I have glass on four sides. On estimate this is 65% of all the "wall" surface.
Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16854



View Profile Email
« Reply #7 on: February 14, 2013, 11:09:10 am »

This is a bit for fun, and you may have seen the picture before, but this is how you should deal with rooms.
I can't say this was the optimal solution, but I played like this for half a year (before I got myself real horns) and the improvement was inmense.
Mind the hood lacking on the mid range, which was on purpose.

If you want diffuse bombastic sound, remove those hoods.
Or treat the room.
Hmm ...
What about making the sound more directional so you can eliminate the room better.

Not that anyone should follow this stupid setup, but I do say that this is another way of looking at the problem; Realize what's actually going on and how it can be solved.

This is nothing about liking horns. It is about accuracy and how it can be achieved. Razor sharp sound which is not harsh because another few things are good (*have* to be good) at the same time. Have that wrong and find yourself now buying filtering cables and such. Also wrong.

Ok, stop. yes



* 002AnotherIdea.jpg (119.86 KB, 800x533 - viewed 979 times.)
Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
christoffe
Audio Addict
***
Offline Offline

Posts: 762


View Profile Email
« Reply #8 on: February 14, 2013, 11:22:17 am »


PS: I have glass on four sides. On estimate this is 65% of all the "wall" surface.

Yes, your room makes me wonder! The sound is phantastic!!!
The only explanation I have, is the enormous kitchen area with all the "filled glasses" on the back side of the room.

Joachim
Logged
fas42
Audio Loudspeaker
*
Offline Offline

Posts: 20


View Profile
« Reply #9 on: February 14, 2013, 11:24:00 am »

Of course, the other thing that is always blamed is the recording -- how many times when Status Quo did poorly in a showroom or elsewhere the host would sniff and effectively say, "Well, if you choose to use rubbish like that for testing systems what else could you expect ?!" ...  Wink

A nice rundown, Peter ...

Frank
Logged
fas42
Audio Loudspeaker
*
Offline Offline

Posts: 20


View Profile
« Reply #10 on: February 14, 2013, 11:36:02 am »

Yes, your room makes me wonder! The sound is phantastic!!!
The only explanation I have, is the enormous kitchen area with all the "filled glasses" on the back side of the room.

Joachim

You're doing it again, relating the quality of the sound to the nature of the room!

Until people grasp the concept that it all depends on the quality of the sound at the point where it exits the speaker driver the going round and round and round in circles will continue ...  wackoGrin

Frank
Logged
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16854



View Profile Email
« Reply #11 on: February 14, 2013, 12:35:42 pm »

The only explanation I have, is the enormous kitchen area with all the "filled glasses" on the back side of the room.

Now we're talking !
haha

Thank you Joachim.
But as you can tell yourself, when you heard it this was dozens of XXHighEnd versions ago, the NOS1-USB improved by miles over the original NOS1 and then there's still this little tweak I told you about secret which again matters vastly.
Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16854



View Profile Email
« Reply #12 on: February 14, 2013, 12:46:16 pm »

PS:

And then to think that my "system" in its current state it to-tal-ly blown away when I would replace my current horns with the speakers from Bert I referred to in the previous post from today. Really, I can't describe that.

But luckily I forgot the sound of them. And I will never visit Bert anymore unless he promises to not play any music.
innocent
Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
PeterSt
Administrator
High Grade Audiophile
*****
Offline Offline

Posts: 16854



View Profile Email
« Reply #13 on: February 14, 2013, 01:03:17 pm »

I hope this is related enough to link it in : Re: Anyone needing support ? go to X-Fi.

I just read it again myself, and now I have tears in my eyes ...
Logged

For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13*  (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).

For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10  (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.

Global Moderator
christoffe
Audio Addict
***
Offline Offline

Posts: 762


View Profile Email
« Reply #14 on: February 14, 2013, 06:48:12 pm »

I hope this is related enough to link it in : Re: Anyone needing support ? go to X-Fi.

I just read it again myself, and now I have tears in my eyes ...

Hi Peter,

Just a small teasing  with your future speakers.

You wrote:
When things sound bad/wrong etc. etc., the very first thing "we" learned is : it will be the room. It is our very first huge excuse.
----------------

You will see the efforts you and BertD have to manage to  get the right sound from your speakers in your room.
And one request: Please do not shut down your server during the  first extended listening sessions with the Happy new horns. Happy

Joachim
« Last Edit: February 15, 2013, 09:09:26 pm by christoffe » Logged
Pages: [1] 2  All
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1 RC2 | SMF © 2001-2005, Lewis Media Valid XHTML 1.0! Valid CSS!
Page created in 0.094 seconds with 20 queries.