|
Arjan
|
 |
« on: January 04, 2013, 10:19:58 am » |
|
Hello,
I am thinking of upgrading my Netbook to a dedicated highend music desktop. E.g. Intel 3930K with 16 Gb memory, SSD and SataIII.
I like to hear of experiences of other people who did that in the past. Will the SQ go up and how much? Or is it only glitchless playback that will be improved?
kind regards, Arjan
|
|
|
|
|
Logged
|
March, 2024 (2.11)
Mach II Stealth 14393 RAM-OS / with videocard / Engine#4 Adaptive Mode / Q1/3/4/5 = 14/0/0/1/ Q1Factor = 4 (Dev.Buffer = 4096) / ClockRes = 10ms / SFS = 10.13 Mx = 10.13 Straight Contiguous / driver buffer 16ms / Playerprio = Low / ThreadPrio = High / Scheme = 3-5 / Unattended / Minimize OS / PeakExtend off / NO Arc Prediction / Custom filter 8x low / 8x Upsampling / XTweaks 62 ,1,-,1,1/with coverart / Stable / Optimal--> mobo USB --> The Lush^2 100 cm --> NOS1a 75B --> Blaxius --> bnc amps Jadis JA30 --> Speakers
|
|
|
|
boleary
|
|
« Reply #1 on: January 05, 2013, 12:15:02 am » |
|
Hi Arjan, regarding XXHighend, in 2007 I started with a Dell Vostro 1500 laptop with 2 gigs of memory. In 2009 I switched to a Vostro 230 with 4 gigs of memory. In the spring of 2012 I put together the computor in my signature below. I found each change, particularly the last, significantly improved sound quality. You should take a look at this thread started by Juan: http://www.phasure.com/index.php?topic=1673.0Tons of good info there. |
|
|
|
|
Logged
|
XX2.07/MB: ASRock Extreme 4M , i7-3930K @ 0.5GHz/ RAM-OS W10586/32 Gigs 1600 DDR3/ Clarixa usb cable /Q1,3,4,5 = *14*/1/1/*1* / *Q1Factor = 1* / Peak Extension: Off/Dev.Buffer = 4096 / ClockRes = *.5ms* / Straight Contiguous / SFS = *.02,/ Do Nothing With Cover Art / not Invert / *(Phase Alignment Off / Playerprio = Low / ThreadPrio = Real Time / Scheme = 3-5 / UnAttended (Just Start) / *All* Services Off except LAN & RDC/ Persist off/No OSD / No Running Time / Minimize OS / Boost on/XTweaks : Balanced Load = *40* / Nervous Rate = 1/ Cool when Idle = NA / Provide Stable Power = 0 / Utilize Cores always = 1 / Time Performance Index = Best/ Time Stability = On/ No Up-sampling/R-2R DAC
|
|
|
|
Telstar
|
|
« Reply #2 on: January 10, 2013, 10:39:19 pm » |
|
Yep, SQ should improve.
xxhe likes many cores and lots of ram to load bigger portion of files (although sometimes low SFS are more liked by the community)
4 cores and 8GB would be the very minimum If i were to build my dedicated PC now.
|
|
|
|
|
Logged
|
(2nd Apr 2018)
Software:
W10 14393 Pro x64 | XXHE 2.10 | MinOS | Q=14x1/0/0/0/0 | SFS 5,19 mixed contiguous | Nervous rate 1 | 4096k buffer |
Hardware:
OrigenAE H5 case | E5300 fanless | 8GB RAM | Winmate DC-DC fanless PSU | OS on SSD | Renesas USB3 pcie card | Belden highspeed usb cable | Audio-gd dac19 NOS with sigxer F1 | My_ref_FE mono amps | Albedo Apex speakers
|
|
|
|
Arjan
|
|
« Reply #3 on: January 16, 2013, 12:21:33 am » |
|
Hi Boleary and Telstar,
Thanks for your answers. So my next upgrade will be a dedicated music PC.
kind regards
|
|
|
|
|
Logged
|
March, 2024 (2.11)
Mach II Stealth 14393 RAM-OS / with videocard / Engine#4 Adaptive Mode / Q1/3/4/5 = 14/0/0/1/ Q1Factor = 4 (Dev.Buffer = 4096) / ClockRes = 10ms / SFS = 10.13 Mx = 10.13 Straight Contiguous / driver buffer 16ms / Playerprio = Low / ThreadPrio = High / Scheme = 3-5 / Unattended / Minimize OS / PeakExtend off / NO Arc Prediction / Custom filter 8x low / 8x Upsampling / XTweaks 62 ,1,-,1,1/with coverart / Stable / Optimal--> mobo USB --> The Lush^2 100 cm --> NOS1a 75B --> Blaxius --> bnc amps Jadis JA30 --> Speakers
|
|
|
|
Arjan
|
|
« Reply #4 on: February 14, 2013, 11:43:24 am » |
|
Hi,
I am working on the selection of components for my new audio computer. But I need some advice. I have a couple of options but will limit it to two basic questions.
1) Go for a fast processor. A computer more or less similar to the one build by Peter last year. Based on a 3930K intel (130W). But a pc like that will need fans to cool and heavier power supply, and so on.
2) or go for a passive computer with e.g. a 3770T intel (45W) processor. This can be completly passive.
The question: will the faster processor with active cooling but 6 cores be better for SQ than the passive PC with a 4 cores processor, although passive.
I really like the idea to go for the second (passive) solution, just a good mobo, processor, 16Gb, HDD, SSD and small power supply, in a streacom case.
Any advice available?
regards, Arjan
|
|
|
|
|
Logged
|
March, 2024 (2.11)
Mach II Stealth 14393 RAM-OS / with videocard / Engine#4 Adaptive Mode / Q1/3/4/5 = 14/0/0/1/ Q1Factor = 4 (Dev.Buffer = 4096) / ClockRes = 10ms / SFS = 10.13 Mx = 10.13 Straight Contiguous / driver buffer 16ms / Playerprio = Low / ThreadPrio = High / Scheme = 3-5 / Unattended / Minimize OS / PeakExtend off / NO Arc Prediction / Custom filter 8x low / 8x Upsampling / XTweaks 62 ,1,-,1,1/with coverart / Stable / Optimal--> mobo USB --> The Lush^2 100 cm --> NOS1a 75B --> Blaxius --> bnc amps Jadis JA30 --> Speakers
|
|
|
|
PeterSt
|
|
« Reply #5 on: February 14, 2013, 12:33:17 pm » |
|
Hi Arjan,
I would never go for the "slow one". It will be too slow to conveniently play music, and besides you will be limited for certain settings which are SQ related. So, SQ in general may (or may not at all) be influenced negatively, but it is about the stupid thing of e.g. receiving gaps at good-SQ settings because all is too slow, while "we" are able to dial-in those good-SQ settings.
I hope you can understand it. So, indirectly it is always SQ related and the faster the better. Just because you will have more options.
Regards,
Peter
|
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
|
Stanray
|
|
« Reply #6 on: February 14, 2013, 03:26:22 pm » |
|
Hi Arjan,
A year ago I faced exactly the same question, speed or silence.
In an attempt to find a fast but silent solution I chose for the Intel i7-2600S (95W). It seems like a tuned down version, but is overclockable.
It is cooled with an oversized cooler, the Thermalright AXP-140RT with a NoiseBlocker 120mm silent fan on top. This is the only fan in the pc. The PSU is a fanless Silentmaxx Fanless II.
It all works great, I had no issues with the common XX settings and the pc is very silent. The choice of the cooler and fan is of course dependent on the type of pc cabinet.
All was ordered at Informatique .
Regards,
Stanley
|
|
|
|
|
Logged
|
AudioPC: Passive Intel i7-2600S / Hyperthreading On / Motherboard: Asus P8H67-V/ RAM: Kingston DDR3 32GB/ Motherboard USB3.0 to NOS1a / PSU: Silentmaxx Fanless II/ no computer cabinet and no fans (NoFan 80 EH passive CPU cooler) / Music via LAN on SSD on MusicServerPC (desktop computer-W10)/ All music in WAV /Control on desktop computer or on Macbook Air <-> Wifi <-> separate (audio)router <-> LAN <-> MusicServerPC <-> LAN <-> AudioPC.
September 2021: Windows 10 Pro 64 bit build 14393.0 from RAM/ XXHE 2.11 / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/1 / Q1Factor = 4/ Dev.Buffer = 4096 / ClockRes = 10ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 10.13 (max 10,13)/ No Filter/ not Invert / Phase Alignment Off / Peak Extend Off /Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback/ UnAttended / All Services Off / Minimize OS / XTweaks : 62, 1, -, 1, 1/ Time Performance Index = Optimal / Time Stability = On / Custom Filtering Low (16x) / -> Lush^3 USB-cable 70cm (A: W-Y-R-G, B: W-G) > Phasure NOS1a 75B G3 DAC, Driver v1.0.4) (16ms)/ Output via Balanced Blaxius BNC Interlinks > Audio Analogue Maestro monoblock amplifier > speakers: Apogee Acoustics Scintilla (custom rebuild).
|
|
|
|
Arjan
|
|
« Reply #7 on: February 16, 2013, 12:55:14 pm » |
|
Hi,
Thanks again for the replies. I ordered the components for the audio PC. The basic mobo, processor and so is similar to the pc created by Peter last year. I will use a Nexus 5000 r3 power supply, it has a fan but is well known for its silence. I use a Silverstone milo 03b case, a 10 cm low case, I will add two case fans, but maybe not use them, lets see. The cooler will be a scythe shuriken 2 rev b with PWM controlled fan, this is my only concern. It seems that the only cpu fan controls today, for X79, are PWM, but this can interact with the SQ. Any thoughts on that?
This audio pc will replace my current netbook, I am really curious to find out the improvements!
regards, Arjan
|
|
|
|
|
Logged
|
March, 2024 (2.11)
Mach II Stealth 14393 RAM-OS / with videocard / Engine#4 Adaptive Mode / Q1/3/4/5 = 14/0/0/1/ Q1Factor = 4 (Dev.Buffer = 4096) / ClockRes = 10ms / SFS = 10.13 Mx = 10.13 Straight Contiguous / driver buffer 16ms / Playerprio = Low / ThreadPrio = High / Scheme = 3-5 / Unattended / Minimize OS / PeakExtend off / NO Arc Prediction / Custom filter 8x low / 8x Upsampling / XTweaks 62 ,1,-,1,1/with coverart / Stable / Optimal--> mobo USB --> The Lush^2 100 cm --> NOS1a 75B --> Blaxius --> bnc amps Jadis JA30 --> Speakers
|
|
|
|
PeterSt
|
|
« Reply #8 on: February 16, 2013, 01:04:14 pm » |
|
Arjan,
While you can, cancel the order for the Nexus. It creates DC Offset on the mains ...
It is silent, but now your (amps etc.) transformers won't be ...
Peter
|
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
|
AlainGr
|
|
« Reply #9 on: February 16, 2013, 03:19:06 pm » |
|
Hey Peter  This Nexus thing is quite interesting. How about the Seasonic brand ? Is there a place where you listed the grocery list for the music pc you made ? Regards, Alain |
|
|
|
|
Logged
|
Desktop with ASUS Sabertooth X79 motherboard,Intel 3930k 6 cores (+ 6) at 1.2 GHZ,32GB ram 1333Mhz,Win 10 pro build 14386 64 bit with no updates,OS + XXHE on external Sata III SSD (Esata), music (WAV) on external 5200 rpm drive through network, OS MInimized, XX with engine 4 adaptive,4096 (buffer size), CPU with scheme 3,Player = Low,Thread = RealTime, Q1 = 14,Q345 = 1,1,1,Q1x=1,Clock res = (variable),Stop Desktop Services,Stop Remaining Services,Stop Wasapi,,LAN on,persist = on,all OSD off,SFS = 2,PE off,PA off, Arc Prediction,x16 Upsample, Straight Contiguous,Lush USB cable,Phasure NOS1a DAC,Meitner PA-6 preamp, Spectral Audio DMA-180 Power Amp, Tannoy System 15 DMT II, Tannoy St-100 supertweeters, Tannoy TS2.12 subwoofers (2). * On hiatus for a while...
|
|
|
|
Arjan
|
|
« Reply #10 on: February 16, 2013, 03:38:56 pm » |
|
Hi Peter,
Interesting remark on the Nexus. Do you have a better brand in mind, e.g. be quiet!. Or go completely passive with a seasonic?
regards, Arjan
|
|
|
|
|
Logged
|
March, 2024 (2.11)
Mach II Stealth 14393 RAM-OS / with videocard / Engine#4 Adaptive Mode / Q1/3/4/5 = 14/0/0/1/ Q1Factor = 4 (Dev.Buffer = 4096) / ClockRes = 10ms / SFS = 10.13 Mx = 10.13 Straight Contiguous / driver buffer 16ms / Playerprio = Low / ThreadPrio = High / Scheme = 3-5 / Unattended / Minimize OS / PeakExtend off / NO Arc Prediction / Custom filter 8x low / 8x Upsampling / XTweaks 62 ,1,-,1,1/with coverart / Stable / Optimal--> mobo USB --> The Lush^2 100 cm --> NOS1a 75B --> Blaxius --> bnc amps Jadis JA30 --> Speakers
|
|
|
|
CoenP
|
|
« Reply #11 on: February 16, 2013, 03:41:21 pm » |
|
Hi Arjan,
Seasonic is great. Take a model over 500W, it has extra capacitance over the "smaller ones. Quality comes with a price though.
Also the Corsair dsp 7xxW units are worth investigating.
Regards, Coen
|
|
|
|
|
Logged
|
Settings: Qn: , SFS: , timeres: XT tweaks: , buf: 4096, driver: 8 ms,
Audio PC (jan 19): XXHE PC v1 with RAMdisk w.o. videocard and 1 of 2 cpu fans + BRIX/USB3 storage musicserver. ETN to Fibre converters (linear supplies), 500m SFP modules & 5m OM4 cable. Power cable PE not connected, together with nos1 and poweramp in separate "audio" powerstrip.
Clarixa set + Intona (or Lush 1m), Phasure NOS1a-75B G3 USB (buf 16 ms)-> Blaxius ->SE EL95 (0,8W triode) + cheap link to Abaqus 300W plateamps> Bastanis cable-> Bastanis Sagarmatha Duo ("DIY").
[other sources: TD124/3009SII-i/Grace F9/lounge LCR phono; Rega Planet 1997 vintage]
|
|
|
|
AlainGr
|
|
« Reply #12 on: February 16, 2013, 03:45:19 pm » |
|
I got the Sesonic Platinum model with a 1kw rating. Not that such power was required, but I thought that the more powerful the PSU, the less chance the PSU fan would run...
Alain
|
|
|
|
|
Logged
|
Desktop with ASUS Sabertooth X79 motherboard,Intel 3930k 6 cores (+ 6) at 1.2 GHZ,32GB ram 1333Mhz,Win 10 pro build 14386 64 bit with no updates,OS + XXHE on external Sata III SSD (Esata), music (WAV) on external 5200 rpm drive through network, OS MInimized, XX with engine 4 adaptive,4096 (buffer size), CPU with scheme 3,Player = Low,Thread = RealTime, Q1 = 14,Q345 = 1,1,1,Q1x=1,Clock res = (variable),Stop Desktop Services,Stop Remaining Services,Stop Wasapi,,LAN on,persist = on,all OSD off,SFS = 2,PE off,PA off, Arc Prediction,x16 Upsample, Straight Contiguous,Lush USB cable,Phasure NOS1a DAC,Meitner PA-6 preamp, Spectral Audio DMA-180 Power Amp, Tannoy System 15 DMT II, Tannoy St-100 supertweeters, Tannoy TS2.12 subwoofers (2). * On hiatus for a while...
|
|
|
|
PeterSt
|
|
« Reply #13 on: February 16, 2013, 03:51:58 pm » |
|
In the XXHighEnd PC the BeQuiet! Pure Power L7 530W is used.
Notice : The reason for exactly this one is not only it being quiet enough, but also it providing enough power connections and merely : it's smaller size. When the size is not of the most importance, others may suffice just as well.
Peter
|
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
|
AlainGr
|
|
« Reply #14 on: February 16, 2013, 04:03:56 pm » |
|
Thanks Peter. I was wondering (and this reflect my ignorance, but anyway): if a PSU would induce DC offset, would it reflect when we check the DC offset of the NOS1 ?
Alain
|
|
|
|
|
Logged
|
Desktop with ASUS Sabertooth X79 motherboard,Intel 3930k 6 cores (+ 6) at 1.2 GHZ,32GB ram 1333Mhz,Win 10 pro build 14386 64 bit with no updates,OS + XXHE on external Sata III SSD (Esata), music (WAV) on external 5200 rpm drive through network, OS MInimized, XX with engine 4 adaptive,4096 (buffer size), CPU with scheme 3,Player = Low,Thread = RealTime, Q1 = 14,Q345 = 1,1,1,Q1x=1,Clock res = (variable),Stop Desktop Services,Stop Remaining Services,Stop Wasapi,,LAN on,persist = on,all OSD off,SFS = 2,PE off,PA off, Arc Prediction,x16 Upsample, Straight Contiguous,Lush USB cable,Phasure NOS1a DAC,Meitner PA-6 preamp, Spectral Audio DMA-180 Power Amp, Tannoy System 15 DMT II, Tannoy St-100 supertweeters, Tannoy TS2.12 subwoofers (2). * On hiatus for a while...
|
|
|
|
