|
praphan
|
 |
« Reply #90 on: October 10, 2010, 05:26:04 pm » |
|
Hi Peter and Mani,
I am one of those few dummies out there running XXHE on W7. Cannot wait to hear it on Vista. But then, I tried installing 0.9-z2 on Vista Business 32 bit without success.
Could anyone please give a dummy instruction to do a lite installation of Vista and step-by-step set up of RAMDISK.
I have W7 and Vista on the same PC.
I am running AMD X4 965 quad core, Gigabyte 880 GA-UD, Radeon HD 5770, Lynx Studio AES 16, 60GB SSD for OS alone, 2TB HHD for Data and 1TB HHD for W7 and other game/video applications.
Thanks in advance for your help guys!
Praphan
|
|
|
|
|
Logged
|
PC: Asus X58 chipset M/B; Seasonic 850W PSU; i7 970 12 threads (HT=on); ATI HD 5770; Zalman Reserator water cooling, 24GB RAM, Plextor PX230A drive ; W7 Pro 64bit plain SP1 (no further update) and XXHE on Velociraptor; music on Sata 3 2 TB HDD; WD5003ABYX sits on Thermaltake USB3 dock as playback drive; Star Tech PCIe USB3 card
XX 0.9z-8-3a : KS Engine 4 "Adaptive"; DB = 4096; APx16; Q1/2/3/4/5 = 14x1/0/0/0/0; No Appointment/low/real time; CR = 0.5 ms; XTweaks Ultimate; SC; SFS= 120/120 ; allow format change; unattended ; min OS and stop "all" services; normalized volume usually played at -15db ; peak extension on ; PA off
Signal chain: 24/786 NOS1 USB; 16 ms buffer on driver 1.0.2 => Valhalla XLR IC = > McIntosh 2301 tube monoblocks => Purist Dominus spk cable => B&W 802 D
|
|
|
|
PeterSt
|
|
« Reply #91 on: October 10, 2010, 06:22:43 pm » |
|
I don't know whether anyone will do this (may be too much work), but *if* someone does it, please create a new topic for it, and I will make it a sticky.
Peter
|
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
Josef
Audio Loudspeaker
 Offline
Posts: 157
|
|
« Reply #92 on: October 10, 2010, 07:02:27 pm » |
|
That RAMDisk benchmark someone posted here was run on a very old hardware so I've re-run it with best 3 on not-so-old hw (CoreDuo 2.2Ghz).
Top row NTFS, bottom FAT16.
From left to right: QRam Enterprise, GillSoft, DataRAM.
Not much difference between 3 packages except it seems that:
1. DataRAM consistently slower. (but also significantly lower DPC latency on 4K test!)
2. NTFS consistently slower.
So, going with FAT seems a no-brainer. Not only is it faster but it leaves more usable memory (notice NTFS ate 22MB on disk with no data).
Other than that, choosing one is a personal preference.
I've picked QRam as it has a ton of options on which part of RAM to use (might come in handy one day) and is cheaper than Gill (or free if you re-install once a quarter or so)...
|
|
|
|
Logged
|
|
|
|
|
boleary
|
|
« Reply #93 on: October 10, 2010, 07:08:21 pm » |
|
Hi Praphan, here's a step by step for RAMdisck:
Re: RAMDisk - Setup
« Reply #61 on: October 08, 2010, 02:14:11 pm »
Quote
The best way the apply RAMDisk:
First set the partition-size and fat32, then do nothing, reboot (or maybe 2 times)
Then you have image space (extra hdd) on your RAM, then copy the complete xx folder to that location.
next, setup xx with all settings that are needed, including your key.
Then go to the second tab in RAMDisk, Load and Save, and press "Save Disk Image Now" and select checkbox "Load Disk Image at Startup"
Reboot
Then finally select checkbox "Save Disk Image on Shutdown"
Reboot
Its about all those reboots that are needed, but when up and running it will work nice.
Roy
PS: correct me if i'am wrong, I will adjust it.
Report to moderator Logged
(Sept 30, 2010)
W7 Ultimate x64 Tweaked/60 GB SSD OCZ Vertex (1.50)/Gigabyte GA-EP45-EXTREME/Intel Q9550 2.83Ghz/OZC Reaper 2x2GB/
Esi Juli@ soundcard (KS)(x2v-v0_978)(Tweaked Coaxial)/Nvidea Geforce 9800 GTX+/750 Watt Zalman ZM-750-HP/100 MB Fiber-Optical Internet/
(XXHighEnd 0.9z-2)
#4Engine, Special Mode, 48 samples, SFS 12MB, DAP, Scheme=3, Q1=1, Q2/Q3/Q4/Q5=30,30,0,0, PlayerPrio=Low, ThreadPrio=Realtime
x-Allow Format Change, x-Stop Services, x-Copy to XX-drive by Standard, x-Start Engine3 During Conversion
PeterSt
Administrator
High Grade Audiophile
Offline
Posts: 4852
Re: RAMDisk
« Reply #62 on: October 08, 2010, 02:21:50 pm »
Quote
Quote
First set the partition-size and fat32, then do nothing, reboot (or maybe 2 times)
This seems superfuous, but is not; It will avoid copying the XX stuff to the RAMDisk again (maybe two times); no big deal, but setting those settings each time is not a nice thing.
Moral : first wait until the RAMDisk shows up automatically after a reboot (thus, maybe two), and when that works, copy in the XX data, set the settings, and finally check that box "Save Image on shutdown" and also save the Image at that point. This latter again is "necessary" because each change (like from the mentioned checkbox) is only dealt with *after* the reboot. So, just one step too late in fact.
Like Roy said : when it works, it keeps on working. Really a nice tool IMO.
Peter
What kind of problems have you encountered trying to install XX on your Vista partition? Just wondering cause I'm planning the same with my desktop. |
|
|
|
|
Logged
|
XX2.07/MB: ASRock Extreme 4M , i7-3930K @ 0.5GHz/ RAM-OS W10586/32 Gigs 1600 DDR3/ Clarixa usb cable /Q1,3,4,5 = *14*/1/1/*1* / *Q1Factor = 1* / Peak Extension: Off/Dev.Buffer = 4096 / ClockRes = *.5ms* / Straight Contiguous / SFS = *.02,/ Do Nothing With Cover Art / not Invert / *(Phase Alignment Off / Playerprio = Low / ThreadPrio = Real Time / Scheme = 3-5 / UnAttended (Just Start) / *All* Services Off except LAN & RDC/ Persist off/No OSD / No Running Time / Minimize OS / Boost on/XTweaks : Balanced Load = *40* / Nervous Rate = 1/ Cool when Idle = NA / Provide Stable Power = 0 / Utilize Cores always = 1 / Time Performance Index = Best/ Time Stability = On/ No Up-sampling/R-2R DAC
|
|
|
|
Gerard
|
|
« Reply #94 on: October 10, 2010, 07:43:11 pm » |
|
Hi Praphan, here's a step by step for RAMdisck:
Re: RAMDisk - Setup
« Reply #61 on: October 08, 2010, 02:14:11 pm »
Quote
The best way the apply RAMDisk:
First set the partition-size and fat32, then do nothing, reboot (or maybe 2 times)
Then you have image space (extra hdd) on your RAM, then copy the complete xx folder to that location.
next, setup xx with all settings that are needed, including your key.
Then go to the second tab in RAMDisk, Load and Save, and press "Save Disk Image Now" and select checkbox "Load Disk Image at Startup"
Reboot
Then finally select checkbox "Save Disk Image on Shutdown"
Reboot
Its about all those reboots that are needed, but when up and running it will work nice.
Roy
PS: correct me if i'am wrong, I will adjust it.
Report to moderator Logged
(Sept 30, 2010)
W7 Ultimate x64 Tweaked/60 GB SSD OCZ Vertex (1.50)/Gigabyte GA-EP45-EXTREME/Intel Q9550 2.83Ghz/OZC Reaper 2x2GB/
Esi Juli@ soundcard (KS)(x2v-v0_978)(Tweaked Coaxial)/Nvidea Geforce 9800 GTX+/750 Watt Zalman ZM-750-HP/100 MB Fiber-Optical Internet/
(XXHighEnd 0.9z-2)
#4Engine, Special Mode, 48 samples, SFS 12MB, DAP, Scheme=3, Q1=1, Q2/Q3/Q4/Q5=30,30,0,0, PlayerPrio=Low, ThreadPrio=Realtime
x-Allow Format Change, x-Stop Services, x-Copy to XX-drive by Standard, x-Start Engine3 During Conversion
PeterSt
Administrator
High Grade Audiophile
Offline
Posts: 4852
Re: RAMDisk
« Reply #62 on: October 08, 2010, 02:21:50 pm »
Quote
Quote
First set the partition-size and fat32, then do nothing, reboot (or maybe 2 times)
This seems superfuous, but is not; It will avoid copying the XX stuff to the RAMDisk again (maybe two times); no big deal, but setting those settings each time is not a nice thing.
Moral : first wait until the RAMDisk shows up automatically after a reboot (thus, maybe two), and when that works, copy in the XX data, set the settings, and finally check that box "Save Image on shutdown" and also save the Image at that point. This latter again is "necessary" because each change (like from the mentioned checkbox) is only dealt with *after* the reboot. So, just one step too late in fact.
Like Roy said : when it works, it keeps on working. Really a nice tool IMO.
Peter
What kind of problems have you encountered trying to install XX on your Vista partition? Just wondering cause I'm planning the same with my desktop. Boleary, Did you say somewhere (i don't now were) that you would explain how to shut off services? I use my pc for music only and would like to play around a bit with those. If it ends up in a new install from Vista so be it. i do not now if it is a lot off work but it would really be appreciated! (maybe a few screenshots)?  |
|
|
|
|
Logged
|
Januari 2017 XX 2.05
OriginAE x11v Home build HTCP ~ Asus x79 mobo 3930K 12 core underclock 500 MHz,
16GB, *Windows 10 Pro 64 bit build 14393.0* *from RAM*, music on music server / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = *0.10* (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core *3-5* / Not Switch Processors during Playback = Off/ Playback Drive *none* (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Not the best (OS from RAM issue) / Time Stability = Off (OS from RAM issue) / Custom Filter Mid 705600 / -> USB3 (Silverstone both sides isolated = Sw#3 of NOS1a = Up) -> *Clairixa USB 15cm* -> Intona Isolator -> Clairixa USB 0.70m -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink ->> Metrum Amps ->> Metrum Acoustics ESL Open Baffle.
|
|
|
|
boleary
|
|
« Reply #95 on: October 10, 2010, 08:25:31 pm » |
|
Wasn't me that talked about shutting off services; recently its mostly been Marcin, Nick, Roy and other knowledgeable folk. Most of those recent descriptions can be found in this thread and in the "We all Fell in the W7 Pitfall" thread.
|
|
|
|
|
Logged
|
XX2.07/MB: ASRock Extreme 4M , i7-3930K @ 0.5GHz/ RAM-OS W10586/32 Gigs 1600 DDR3/ Clarixa usb cable /Q1,3,4,5 = *14*/1/1/*1* / *Q1Factor = 1* / Peak Extension: Off/Dev.Buffer = 4096 / ClockRes = *.5ms* / Straight Contiguous / SFS = *.02,/ Do Nothing With Cover Art / not Invert / *(Phase Alignment Off / Playerprio = Low / ThreadPrio = Real Time / Scheme = 3-5 / UnAttended (Just Start) / *All* Services Off except LAN & RDC/ Persist off/No OSD / No Running Time / Minimize OS / Boost on/XTweaks : Balanced Load = *40* / Nervous Rate = 1/ Cool when Idle = NA / Provide Stable Power = 0 / Utilize Cores always = 1 / Time Performance Index = Best/ Time Stability = On/ No Up-sampling/R-2R DAC
|
|
|
|
AUDIODIDAKT
|
|
« Reply #96 on: October 10, 2010, 08:59:59 pm » |
|
Gerard, Search/Run, "Services.msc" or see hereFor services and what they do see Black ViperRoy |
|
|
|
|
Logged
|
(Sept 30, 2010)
W7 Ultimate x64 Tweaked/60 GB SSD OCZ Vertex (1.50)/Gigabyte GA-EP45-EXTREME/Intel Q9550 2.83Ghz/OZC Reaper 2x2GB/
Esi Juli@ soundcard (KS)(x2v-v0_978)(Tweaked Coaxial)/Nvidea Geforce 9800 GTX+/750 Watt Zalman ZM-750-HP/100 MB Fiber-Optical Internet/
(XXHighEnd 0.9z-2)
#4Engine, Special Mode, 48 samples, SFS 12MB, DAP, Scheme=3, Q1=1, Q2/Q3/Q4/Q5=30,30,0,0, PlayerPrio=Low, ThreadPrio=Realtime
x-Allow Format Change, x-Stop Services, x-Copy to XX-drive by Standard, x-Start Engine3 During Conversion
|
|
|
Josef
Audio Loudspeaker
Offline
Posts: 157
|
|
« Reply #97 on: October 10, 2010, 11:01:29 pm » |
|
Hey guys - anybody spent some time listening to different RAMdisks? I mean, this whole thing really makes no sense at all: as XX is pre-loading files into RAM before playing it should not matter, right?....ugh, then it should also not matter if HD/SDD is used......yet, it seems everyone here is noting a difference and mostly positive ones to boot ....gosh.... But, if we assume that RAMdisk makes a difference (even though it should not), could it be that different RAMdisks sound different too? (even though it should not matter at all?) Indeed, Raj suggested that this was the case and, specifically, he found GiliSoft preferable to Dataram. Was anybody else here brave enough to venture into this highly improbable realm?.....No? Well, why playing with benchmarks I also played same tracks from different RAMdisks and, as much as I hate to admit, it would seem that Raj could be onto something... Contrary to Raj, though, I just can't stand Gilisoft....in short, found it too 'mechanical'.... On the other hand, Dataram was good but maybe just a bit 'thinnner' than QRam which I preferred in the end...... OK, I know this sounds weird (to say the least, LOL) but then I looked a bit under-the-covers and it seems RAMDisks go about their memory allocation differently: it seems that both Dataram & Gili rely on 'local device driver' memory (which is a bit of a no-no per MS recommendations when it comes to such large allocations, btw) whereas QSoft defaults to Kernel non-paged pool (although it can be configured to behave in similar manner or use Kernel Paged-pool instead...) Now, in theory, this _could_ make a difference if one has a swap file.... I don't, so I'm stumped... Anybody tried this? (or care to explain why this is all a placebo, please?... |
|
|
|
|
Logged
|
|
|
|
|
PeterSt
|
|
« Reply #98 on: October 10, 2010, 11:12:28 pm » |
|
Ok, I did not. But just because I'm happy as it is.
|
|
|
|
|
Logged
|
For the Stealth III LPS PC :
W10-14393.0 - July 17, 2021 (2.11)
XXHighEnd Mach III Stealth LPS PC -> Xeon Scalable 14/28 core with Hyperthreading On (set to 14/28 cores in BIOS and set to 10/20 cores via Boot Menu) @~660MHz, 48GB, Windows 10 Pro 64 bit build 14393.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/0/0/*1*/ Q1Factor = *4* / Dev.Buffer = 4096 / ClockRes = *10ms* / Memory = Straight Contiguous / Include Garbage Collect / SFS = *10.13* (max 10.13) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / Stop Desktop, Remaining, WASAPI and W10 services / Use Remote Desktop / Keep LAN - Not Persist / WallPaper On / OSD Off (!) / Running Time Off / Minimize OS / XTweaks : Balanced Load = *62* / Nervous Rate = *1* / Cool when Idle = n.a / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Optimal / Time Stability = Stable / Custom Filtering *Low* (16x) / Always Clear Proxy before Playback = On -> USB3 from MoBo -> Lush^3
A: W-Y-R-G, B: *W-G* USB 1m00 -> Phisolator 24/768 Phasure NOS1a/G3 75B (BNC Out) async USB DAC, Driver v1.0.4b (16ms) -> B'ASS Current Amplifier -> Blaxius*^2.5* A:B-G, B:B-G Interlink -> Orelo MKII Active Open Baffle Horn Speakers. ET^2 Ethernet from Mach III to Music Server PC (RDC Control).
Removed Switching Supplies from everywhere (also from the PC).
For a general PC :
W10-10586.0 - May 2016 (2.05+)
*XXHighEnd PC -> I7 3930k with Hyperthreading On (12 cores)* @~500MHz, 16GB, Windows 10 Pro 64 bit build 10586.0 from RAM, music on LAN / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = 0.10 (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core 3-5 / Not Switch Processors during Playback = Off/ Playback Drive none (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = *Optimal* / Time Stability = *Stable* / Custom Filter *Low* 705600 / -> USB3 *from MoBo* -> Clairixa USB 15cm -> Intona Isolator -> Clairixa USB 1m80 -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink *-> B'ASS Current Amplifier /w Level4 -> Blaxius Interlink* -> Orelo MKII Active Open Baffle Horn Speakers.
Removed Switching Supplies from everywhere.
Global Moderator
|
|
|
|
JohanZ
|
|
« Reply #99 on: October 11, 2010, 12:40:22 am » |
|
I'm happy as it is. What RamDisk software do you use? Regards, Johan |
|
|
|
|
Logged
|
XXHE Ver: 209/MSI Z87M, i7 4770K Hyperthreading On (8 cores) @ 1,2 GHz, 32GB, Windows 10-14393.0 from RAM / Engine#4 Adaptive Mode / Q1/-/3/4/5 = *30*/-/1/1/1 Q1Factor = *40* / Dev.Buffer = 4096 / ClockRes = 15 / Memory = Straight Contiguous / Include Garbage Collect / SFS = *20.19* (max 120) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = *Core3-5* / Not Switch Processors during Playback / UnAttended (Just Start) / All Services Off / WallPaper On/ No OSD / No Running Time / Minimize OS / XTweaks : *Use Settings* - *43,1, 1, 1, 1* / Time Performance Index = Optimal / Time Stability = Stable/ Octo Arc Prediction Upsampling / -> USB3 -> Clairixa-Itona-Clairixa ->24/768 PHASURE NOS1a-75B-G3 , Driver v1.0.4b (*16ms*) -> Blaxius BNC interconnects ->Audion Silver Knight 300B-> Speakers CornScala
|
|
|
|
Gerard
|
|
« Reply #100 on: October 11, 2010, 10:07:40 am » |
|
Gerard, Search/Run, "Services.msc" or see hereFor services and what they do see Black ViperRoy Thanx Roy, Was there not someone who said he had only 8 services left? If so i like to now which they are. (Mani Nick)?? |
|
|
|
|
Logged
|
Januari 2017 XX 2.05
OriginAE x11v Home build HTCP ~ Asus x79 mobo 3930K 12 core underclock 500 MHz,
16GB, *Windows 10 Pro 64 bit build 14393.0* *from RAM*, music on music server / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = *0.10* (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core *3-5* / Not Switch Processors during Playback = Off/ Playback Drive *none* (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Not the best (OS from RAM issue) / Time Stability = Off (OS from RAM issue) / Custom Filter Mid 705600 / -> USB3 (Silverstone both sides isolated = Sw#3 of NOS1a = Up) -> *Clairixa USB 15cm* -> Intona Isolator -> Clairixa USB 0.70m -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink ->> Metrum Amps ->> Metrum Acoustics ESL Open Baffle.
|
|
|
|
Marcin_gps
|
|
« Reply #101 on: October 11, 2010, 10:18:49 am » |
|
Yeah, that was me. Actually, I ended up with 7 services running Give me some time to write about everything I applied. |
|
|
|
|
Logged
|
|
|
|
|
Gerard
|
|
« Reply #102 on: October 11, 2010, 10:23:55 am » |
|
Yeah, that was me. Actually, I ended up with 7 services running Give me some time to write about everything I applied. Ok thanx i will wait patiently  |
|
|
|
|
Logged
|
Januari 2017 XX 2.05
OriginAE x11v Home build HTCP ~ Asus x79 mobo 3930K 12 core underclock 500 MHz,
16GB, *Windows 10 Pro 64 bit build 14393.0* *from RAM*, music on music server / Engine#4 Adaptive Mode / Q1/-/3/4/5 = 14/-/1/1/1 / Q1Factor = 1 / Dev.Buffer = 4096 / ClockRes = 1ms / Memory = Straight Contiguous / Include Garbage Collect / SFS = *0.10* (max 60) / not Invert / Phase Alignment Off / Playerprio = Low / ThreadPrio = Realtime / Scheme = Core *3-5* / Not Switch Processors during Playback = Off/ Playback Drive *none* (see OS from RAM) / UnAttended (Just Start) / Always Copy to XX Drive (see OS from RAM) / All Services Off / Keep LAN - Not Persist / WallPaper On / OSD On / Running Time Off / Minimize OS / XTweaks : Balanced Load = *43* / Nervous Rate = 1 / Cool when Idle = 1 / Provide Stable Power = 1 / Utilize Cores always = 1 / Time Performance Index = Not the best (OS from RAM issue) / Time Stability = Off (OS from RAM issue) / Custom Filter Mid 705600 / -> USB3 (Silverstone both sides isolated = Sw#3 of NOS1a = Up) -> *Clairixa USB 15cm* -> Intona Isolator -> Clairixa USB 0.70m -> 24/768 Phasure NOS1a 75B (BNC Out) async USB DAC, Driver v1.0.4b (4ms) -> Blaxius BNC interlink ->> Metrum Amps ->> Metrum Acoustics ESL Open Baffle.
|
|
|
|
Telstar
|
|
« Reply #103 on: October 11, 2010, 02:58:35 pm » |
|
OK, I know this sounds weird (to say the least, LOL) but then I looked a bit under-the-covers and it seems RAMDisks go about their memory allocation differently: it seems that both Dataram & Gili rely on 'local device driver' memory (which is a bit of a no-no per MS recommendations when it comes to such large allocations, btw) whereas QSoft defaults to Kernel non-paged pool (although it can be configured to behave in similar manner or use Kernel Paged-pool instead...) Now, in theory, this _could_ make a difference if one has a swap file.... I don't, so I'm stumped... Anybody tried this? (or care to explain why this is all a placebo, please?... I use the swap. but I dont have that much time to try  |
|
|
|
|
Logged
|
(2nd Apr 2018)
Software:
W10 14393 Pro x64 | XXHE 2.10 | MinOS | Q=14x1/0/0/0/0 | SFS 5,19 mixed contiguous | Nervous rate 1 | 4096k buffer |
Hardware:
OrigenAE H5 case | E5300 fanless | 8GB RAM | Winmate DC-DC fanless PSU | OS on SSD | Renesas USB3 pcie card | Belden highspeed usb cable | Audio-gd dac19 NOS with sigxer F1 | My_ref_FE mono amps | Albedo Apex speakers
|
|
|
|
AUDIODIDAKT
|
|
« Reply #104 on: October 11, 2010, 05:52:03 pm » |
|
Hi all, Me also back at work, after a long period without a job. So have to take some steps back now, although i will follow everything closely. But unfortunately I can spend less time on testing and such. Roy |
|
|
|
|
Logged
|
(Sept 30, 2010)
W7 Ultimate x64 Tweaked/60 GB SSD OCZ Vertex (1.50)/Gigabyte GA-EP45-EXTREME/Intel Q9550 2.83Ghz/OZC Reaper 2x2GB/
Esi Juli@ soundcard (KS)(x2v-v0_978)(Tweaked Coaxial)/Nvidea Geforce 9800 GTX+/750 Watt Zalman ZM-750-HP/100 MB Fiber-Optical Internet/
(XXHighEnd 0.9z-2)
#4Engine, Special Mode, 48 samples, SFS 12MB, DAP, Scheme=3, Q1=1, Q2/Q3/Q4/Q5=30,30,0,0, PlayerPrio=Low, ThreadPrio=Realtime
x-Allow Format Change, x-Stop Services, x-Copy to XX-drive by Standard, x-Start Engine3 During Conversion
|
|
|
|
