XXHighEnd

Ultimate Audio Playback => XXHighEnd Support => Topic started by: Scroobius on May 29, 2013, 08:24:40 pm



Title: Check Playback Structure msg
Post by: Scroobius on May 29, 2013, 08:24:40 pm
I fist installed 09-z8a on an i5 laptop and that works fine in full os and minimised. No problems.

I then installed 09z-9 and with settings identical to 09-z8a it does not work I get "Non Covered for playback situation!". So it will not work in Attended and it will not go into minimised.

Paul


Title: Re: Check Playback Structure msg
Post by: PeterSt on May 29, 2013, 08:45:52 pm
Paul,

That "Minimized" can't be related to the same problem. Maybe open a new topic for that with some more specifics ?

Otherwise, what is your input sample rate and bit depth, and what's the output ?
N.b.: This is a typical problem as mentioned in the Release Notes, and now I need to know exactly about the formats.

Thanks,
Peter


Title: Re: Check Playback Structure msg
Post by: PeterSt on May 29, 2013, 08:57:23 pm
DAC Needs is also important. And Filtering Type (AP etc.).


Title: Re: Check Playback Structure msg
Post by: Scroobius on May 29, 2013, 09:26:32 pm
OK the DAC is simple NOS based on TDA1543 I am running it at 16/44 so filtering is not selected. Buffer size is 512. These settings work OK on 09-z83a



Title: Re: Check Playback Structure msg
Post by: PeterSt on May 29, 2013, 09:34:43 pm
So ... 16/44.1 -> 16/44.1 is not working. Correct ?
I was afraid of that (see Release Notes). Now I must dig up my Audio Note - haha.


Title: Re: Check Playback Structure msg
Post by: PeterSt on May 29, 2013, 09:35:26 pm
And some interface.
Bweh.


Title: Re: Check Playback Structure msg
Post by: Scroobius on May 29, 2013, 09:40:31 pm
I just checked Minimize OS - if I start the laptop in full os, open XX and press "Minimize OS" it will go to minimised o/s no problems.

However if I first try to play music getting get the "Non covered..........." msg then I cannot subsequently go to minimised I get an error msg.